log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • How a UPS system works with a Generator

    How a UPS system works with a Generator

    Sep , 19 2022
    As weather extremes and storms increase, power outages are likely to continue to rise. According to the U.S. Energy Information Administration, U.S. customers experienced an average of nearly six hours of power interruptions in 2018. If you have invested in a generator, you’ve prepared for when a storm hits, right? Almost. Even with a generator, you still need a battery backup, also known as an Un...
    more

  • Key Factors in Choosing the Right UPS

    Key Factors in Choosing the Right UPS

    Sep , 26 2022
    You rely on your UPS system for backup if your power goes out, right? But does your UPS have your back? That is, will it provide a bridge of power long enough for what you need? At the very least you will want to save your data and perform a safe shutdown. Your UPS backup battery will only provide power for a set amount of time, known as runtime. In this article, we will provide a step-by-step app...
    more

  • Failure causes of lithium battery- Failure during recycling

    Failure causes of lithium battery- Failure during recycling

    Oct , 08 2022
    The battery is generally exothermic during use, so the effect of temperature is very important. In addition, road conditions, usage, ambient temperature, etc. will have different effects. The capacity loss of LiFePO4 power batteries during cycling is generally considered to be caused by the loss of active lithium ions. The research shows that the aging of LiFePO4 power battery during cycling is ma...
    more

  • Failure causes of lithium battery- Failure during charging and discharging

    Failure causes of lithium battery- Failure during charging and discharging

    Oct , 08 2022
    The battery is often overcharged in the process of use. Relatively speaking, the overdischarge situation is less. The heat released during the overcharge or overdischarge process is easy to accumulate inside the battery, which will further increase the battery temperature. , affecting the service life of the battery and increasing the possibility of the battery catching fire or exploding. Even und...
    more

  • How to do the battery identification of lithium technology?

    How to do the battery identification of lithium technology?

    Oct , 17 2022
    How to do the battery identification of lithium technology? According to the IEC61960 standard, the identification of secondary lithium batteries is as follows: 01) The battery identification consists of 3 letters followed by 5 numbers (cylindrical) or 6 (square) numbers. 02) The first letter: Indicates the negative electrode material of the battery. I—represents lithium ions with built-in batteri...
    more

  • What is pulse charging and output power of a battery?

    What is pulse charging and output power of a battery?

    Oct , 24 2022
    What is pulse charging? What is the impact on battery performance? Pulse charging generally adopts the method of charging and discharging, that is, charging for 5 seconds and discharging for 1 second, so that most of the oxygen generated during the charging process will be reduced to electrolyte under the discharge pulse. It not only limits the vaporization of the internal electrolyte, but also fo...
    more

  • What are the possible reasons for the zero voltage or low voltage of the single cell and battery pack?

    What are the possible reasons for the zero voltage or low voltage of the single cell and battery pack?

    Oct , 24 2022
    What are the possible reasons for the zero voltage or low voltage of the single cell? 01) External short circuit or overcharge or reverse charge of the battery (forced overdischarge); 02) The battery is continuously overcharged by high rate and high current, resulting in the expansion of the battery pole core, the direct contact of the positive and negative poles, and the short circuit; 03) Intern...
    more

  • What is round trip efficiency and response time for Energy storage solution?

    What is round trip efficiency and response time for Energy storage solution?

    Oct , 31 2022
    Round-Trip Efficiency Round-trip efficiency takes into consideration energy losses from power conversions and parasitic loads (e.g., electronics, heating and cooling, and pumping) associated with operating the energy storage system. This metric is a key determinant of the cost-effectiveness of energy storage technologies. Among energy storage options, compressed-air energy storage (CAES) has the l...
    more

  • Major Interconnection Issues for Energy storage solution

    Major Interconnection Issues for Energy storage solution

    Oct , 31 2022
    Major Interconnection Issues Generally, DG-based power systems can operate in independent or stand-alone and grid-connected modes. In fact, in the first mode, the capacity of a DG unit is selected only based on the load requirements. But, in the latter case, this constraint is not determinant. Although the grid-connected operation mode usually is preferred due to the bilateral energy exchanges, th...
    more

  • Operation mode of integrated ESS application

    Operation mode of integrated ESS application

    Oct , 31 2022
    Operation mode ESS installed at the new energy power generation side can be operated under the following several modes, each independent from each other and not necessarily multifunctional: 1.    Power variation rate limitation. Power variation rate is limited to a certain range relying on real-time measurement of the output power of a wind power plant. The ESS starts charging when the o...
    more

  • Advantages of combining solar and energy storage

    Advantages of combining solar and energy storage

    Nov , 08 2022
    Grid stability, battery safety and blackout prevention Solar-storage solutions can act as sunshine insurance, allowing stored power to be dispensed when power demand is high (and accompanied by higher prices) and solar generation is low. Aided by these smart technologies, unified solar and storage can also help prevent blackouts, an issue seen from Australia to California, Lebanon to South Africa....
    more

  • Barriers to widespread adoption of solar-plus-storage

    Barriers to widespread adoption of solar-plus-storage

    Nov , 08 2022
    The main barrier to widespread adoption of solar-plus-storage is know-how: configuring the optimal design, gauging investment, and navigating risk management (including regulations), and the high complexity and cost of managing these systems. In configuring the optimal system design, one faces challenges such as designing the ideal battery configuration to maximise return on investment (ROI), figu...
    more
first page << 1 ... 8 9 10 11 12 ... 21 >> last page

a total of21 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact