log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Using uninterruptible power supply systems to avoid power disruptions

    Using uninterruptible power supply systems to avoid power disruptions

    Feb , 15 2023
    Any outage scenario causes worry and wonder among employees, as well as stress and strain for the team in charge. Instead of working efficiently, everyone gathers around a window to see or discuss the cause, which can be one of many things. Power loss without uninterruptible power supply systems Utility companies routinely summarize the reasons for any power outages in the regular reports. The cau...
    more

  • Answers to the characteristics of lead-acid batteries

    Answers to the characteristics of lead-acid batteries

    Feb , 16 2023
    1. How AGM vs Lead Acid Batteries Work The AGM battery and the standard lead acid battery are technically the same when it comes to their base chemistry. They both use lead plates and an electrolyte mix of sulfuric acid and water and have a chemical reaction that produces hydrogen and oxygen as a byproduct. However, this is when they start to diverge. Here’s how: A. Flooded Lead Acid Battery The f...
    more

  • Lead-acid battery characteristics

    Lead-acid battery characteristics

    Feb , 24 2023
    Ⅰ： Electromotive force, internal resistance and terminal voltage of lead-acid battery: 1): Electromotive force: refers to the potential difference between the two poles, which depends on the relative density and temperature of the electrolyte.The relative density temperature coefficient of lead-acid battery is 0.00075, that is, the relative density decreases by 0.00075 when the electrolyte tempera...
    more

  • Effect of ambient temperature on battery life

    Effect of ambient temperature on battery life

    Mar , 01 2023
    1）Temperature will affect battery capacity At different temperatures, the viscosity of the sulfuric acid solution in the battery will be inconsistent. For example, when the battery is at a temperature below 0°C, as the temperature decreases, the resistance of the sulfuric acid solution will continue to increase, which will directly increase the weight of the electrode. The effect of polarization, ...
    more

  • Battery capacity test

    Battery capacity test

    Mar , 09 2023
    Method 1: offline measurement (1) After fully charging the battery pack disconnected from the power supply system, let it stand for 1-24 hours, and start at the ambient temperature of 25 ℃ ± 5 ℃ Discharge; (2) The terminal voltage of the battery shall be measured before discharge. During discharge, the discharge current time and ambient temperature of the battery shall be measured and recorded The...
    more

  • How Lithium-ion Batteries Work

    How Lithium-ion Batteries Work

    Mar , 23 2023
    Lithium-ion batteries are popular because they have a number of important advantages over competing technologies: They're generally much lighter than other types of rechargeable batteries of the same size. The electrodes of a lithium-ion battery are made of lightweight lithium and carbon. Lithium is also a highly reactive element, meaning that a lot of energy can be stored in its at...
    more

  • What are the factors that are unfavorable to lead-acid batteries?

    What are the factors that are unfavorable to lead-acid batteries?

    Apr , 15 2023
    There are many factors that are unfavorable to the battery, mainly in the charging and discharging phase. (1). The "second super" discharge stage is mainly the discharge current overvalue, that is, the discharge exceeds the allowable current value for a long time; the second problem of discharge is over-discharge, that is, exceeding the allowable discharge capacity of the battery, which is called ...
    more

  • Three-stage charging of lead-acid battery

    Three-stage charging of lead-acid battery

    Apr , 15 2023
    1. What is the three-stage charging of lead-acid batteries? The charging method of lead-acid batteries should be divided into three stages, namely: constant current charging - constant voltage charging - trickle charging. Constant current charging stage: charge to 13.4V with 0.2C10 A current. Constant voltage charging stage: 2.4V/cell, charging time 3h, cut-off current 0.02C10A Trickle charge phas...
    more

  • What are the reasons for the sulfation of lead-acid battery plates?

    What are the reasons for the sulfation of lead-acid battery plates?

    Apr , 15 2023
    The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...
    more

  • How to Select a UPS for Power Backup？

    How to Select a UPS for Power Backup？

    May , 29 2023
    If you’ve spent any time looking for a backup power UPS, then you already know that when it comes to an uninterruptible power supply, you have an unlimited number of options. Narrowing them down and choosing the right UPS power supply for your application depends on a number of different factors including UPS system typology, UPS load capacity, and UPS runtime, to name just a few. Simplify your UP...
    more

  • UPS battery maintenance is importance for power backup

    UPS battery maintenance is importance for power backup

    May , 29 2023
    Who would not appreciate a backup power supply? So, your uninterruptible power supply at the heart of it. Do you know that the many batteries that make up your UPS Battery are each crucial to its functioning? One badly working battery can ruin your entire system. Especially in the places like data centre operations, this risk is highly unaffordable. Most of the time when you hear the UPS failed is...
    more

  • Self-discharge measurement of lithium batteries: resting and dynamic measurement methods

    Self-discharge measurement of lithium batteries: resting and dynamic measurement methods

    Jun , 14 2023
    The measurement methods of self-discharge of lithium-ion batteries are mainly divided into two categories: 1) static measurement method, which obtains the self-discharge rate by standing the battery for a long time; 2) Dynamic measurement method to realize the parameter identification of the battery in the dynamic process. Static measurement method At present, the mainstream self-discharge measure...
    more
first page << 1 ... 5 6 7 8 9 10 11 12 >> last page

a total of12 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact