log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Failure causes of lithium battery- Failure in other aspects

    Failure causes of lithium battery- Failure in other aspects

    Oct , 08 2022
    Due to the low intrinsic conductivity of LiFePO4, the morphology and size of the material itself, as well as the influence of conductive agents and binders, are easily manifested. Discussing the two contradictory factors of size and carbon coating , it is found that the impedance of LiFePO4 electrode is only related to the average particle size. The anti-site defect inside LiFePO4 (Fe occupies Li ...
    more

  • Overview of Si-based anode materials

    Overview of Si-based anode materials

    Oct , 17 2022
    The theoretical specific capacity of Si is as high as 4200mAh/g, which is 10 times higher than the theoretical specific capacity of graphite; the lithium intercalation potential of Si is low, which is 0.37mV Li/Li+; and Si is the second most abundant element on the earth, which is not harmful to the environment. Destruction will occur, and the production process of nano-silicon is mature and low-c...
    more

  • What is the 24 hour self discharge test and what precautions should be taken when using a battery?

    What is the 24 hour self discharge test and what precautions should be taken when using a battery?

    Oct , 17 2022
    What are the commonly used standards for batteries? Commonly used IEC standards for batteries: The standard for nickel-metal hydride batteries is IEC61951-2:2003; the lithium- ion battery industry generally follows UL or national standards.In addition, the commonly used standards for batteries also include the Japanese Industrial Standard JIS C standards for batteries. IEC, the International Elect...
    more

  • What is open circuit voltage and what is the capacity of a battery?

    What is open circuit voltage and what is the capacity of a battery?

    Oct , 17 2022
    What is the nominal voltage? The nominal voltage of the battery refers to the voltage displayed during normal operation. The nominal voltage of the secondary nickel-cadmium nickel-hydrogen battery is 1.2V; the nominal voltage of the secondary lithium battery is 3.6V. What is open circuit voltage? The open circuit voltage refers to the potential difference between the positive and negative electrod...
    more

  • What are the reliability and safety test items for batteries?

    What are the reliability and safety test items for batteries?

    Oct , 17 2022
    What are the reliability test items for batteries? 01) Cycle life 02) Discharge characteristics at different rates 03) Discharge characteristics at different temperatures 04) Charging characteristics 05) Self-discharge characteristics 06) Storage characteristics 07) Overdischarge characteristics 08) Internal resistance characteristics at different temperatures 09) Temperature cycle test 10) Drop t...
    more

  • What kind of conditions are better for batteries to be stored in?

    What kind of conditions are better for batteries to be stored in?

    Oct , 24 2022
    Can the battery be stored in the appliance after it is used up or if it is not used for a long time? If the electrical appliance will not be used for a long time, it is better to take the battery out and put it in a low temperature and dry place. If not, even if the electrical appliance is turned off, the system will still make the battery have a low current output, which will shorten the battery ...
    more

  • What is round trip efficiency and response time for Energy storage solution?

    What is round trip efficiency and response time for Energy storage solution?

    Oct , 31 2022
    Round-Trip Efficiency Round-trip efficiency takes into consideration energy losses from power conversions and parasitic loads (e.g., electronics, heating and cooling, and pumping) associated with operating the energy storage system. This metric is a key determinant of the cost-effectiveness of energy storage technologies. Among energy storage options, compressed-air energy storage (CAES) has the l...
    more

  • Major Interconnection Issues for Energy storage solution

    Major Interconnection Issues for Energy storage solution

    Oct , 31 2022
    Major Interconnection Issues Generally, DG-based power systems can operate in independent or stand-alone and grid-connected modes. In fact, in the first mode, the capacity of a DG unit is selected only based on the load requirements. But, in the latter case, this constraint is not determinant. Although the grid-connected operation mode usually is preferred due to the bilateral energy exchanges, th...
    more

  • Operation mode of integrated ESS application

    Operation mode of integrated ESS application

    Oct , 31 2022
    Operation mode ESS installed at the new energy power generation side can be operated under the following several modes, each independent from each other and not necessarily multifunctional: 1.    Power variation rate limitation. Power variation rate is limited to a certain range relying on real-time measurement of the output power of a wind power plant. The ESS starts charging when the o...
    more

  • Working principle of a generator side distributed Energy storage system

    Working principle of a generator side distributed Energy storage system

    Oct , 31 2022
    An individual distributed ESS is smaller than an aggregated ESS, because it only handles a single (or a small group) renewable generation unit. Similar to aggregated ESSs, the major function of generator side distributed ESS is to smooth the output of renewables. The distributed ESSs are installed on-site with each renewable generation unit, as illustrated in below figure. A distributed ESS is usu...
    more

  • Why battery energy storage moving to higher DC voltages (Part-1)

    Why battery energy storage moving to higher DC voltages (Part-1)

    Nov , 08 2022
    Today, most utility-scale solar inverters and converters use 1500 VDC input from the solar panels. Matching the energy storage DC voltage with that of the PV eliminates the need to convert battery voltage, resulting in greater space efficiency and avoided equipment costs. The evolution of battery energy storage systems (BESS) is now pushing higher DC voltages in utility scale applications. The Woo...
    more

  • Why battery energy storage moving to higher DC voltages (Part-2)

    Why battery energy storage moving to higher DC voltages (Part-2)

    Nov , 08 2022
    With these new devices, a system designer can expect that the system will be as efficient, reliable, and protected as possible. At ABB we offer an extensive line of higher rated DC components from 600 VDC to 1500 VDC, designed to meet today’s utility BESS requirements. UL-rated 480 VAC to 1000 VAC and 600 VDC to 1500 VDC components are used in the following BESS system components: Battery Manageme...
    more
first page << 1 ... 6 7 8 9 10 ... 15 >> last page

a total of15 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact