log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Lead-acid battery failure model

    Lead-acid battery failure model

    May , 11 2024
    The most common failure modes are:   - Softening or shedding of the active material.  During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide.    Corrosion...
    more

  • Advantages of Nickel-Cadmium Batteries

    Advantages of Nickel-Cadmium Batteries

    May , 31 2024
    Ni-Cd batteries have been around nearly as long as lead-acid. Commercial products have been available since around 19007. Pocket plate designs are typically used for long to high current types, while fiber plates are used for extremely high current short demand applications like engine starting.   While Ni-Cd batteries typically cost many times what a comparable lead-acid does, their characte...
    more

  • What is a nickel-cadmium battery

    What is a nickel-cadmium battery

    May , 31 2024
    1. Working principle of nickel-cadmium battery Nickel-cadmium batteries are rechargeable batteries that convert chemical energy into electricity through REDOX reactions. It consists of a negative electrode (the negative material is Cd), a positive electrode (the positive material is NiOOH), and an electrolyte (the main component is KOH). 2. Features of nickel-cadmium batteries Long cycle life; Wid...
    more

  • What are the characteristics of industrial UPS power supplies

    What are the characteristics of industrial UPS power supplies

    Jun , 14 2024
    Industrial UPS power supply needs to focus on the design of the ability to operate in high-temperature environments. Component design must be adapted to the operating requirements of industrial environments, high temperature and high humidity, but also to cope with corrosive gases on the corrosion of the system. Operating continuously at full load under a variety of operating conditions, industria...
    more

  • Industrial and commercial energy storage system liquid cooling design

    Industrial and commercial energy storage system liquid cooling design

    Jun , 14 2024
    1. Industrial and commercial energy storage system liquid cooling design For the high-rate charging and discharging process of large-scale battery packs, the cooling capacity of air cooling system can not meet the heat dissipation demand of battery packs. Liquid has a higher specific heat capacity and higher thermal conductivity than air, and the liquid cooling cooling speed is faster, which has a...
    more

  • Influence of lithium analysis on battery capacity

    Influence of lithium analysis on battery capacity

    Jun , 27 2024
    I. Introduction The phenomenon of lithium evolution is an important problem affecting the capacity of lithium batteries. This article will discuss the impact of lithium analysis on battery capacity with you in detail, and analyze its causes and solutions. Second, the impact of lithium on battery capacity 1. Loss of active lithium ions Lithium evolution causes some of the lithium ions to form lithi...
    more

  • Analysis and application of charge and discharge curve of lithium battery

    Analysis and application of charge and discharge curve of lithium battery

    Jun , 27 2024
    Abstract: In this paper, the analysis method of charge and discharge curve of lithium battery is introduced in detail, including charge efficiency, discharge characteristics, capacity evaluation, internal resistance evaluation and cycle life evaluation. Through the interpretation of the charge and discharge curve, the performance and characteristics of lithium batteries can be deeply understood, w...
    more

  • What is the meaning of float charging for intelligent three‐stage charger in battery charger?

    What is the meaning of float charging for intelligent three‐stage charger in battery charger?

    Jul , 12 2024
    Float charging: Keep constant voltage charging, the charging current continues to decrease, and the battery is charged with maintenance type. When the charging current decreases to the set value or the charging time reaches the set value, the red light of sufficiency will be on, and the time will be about 2H, charging 10% of the power. Ordinary chargers are old‐fashioned chargers, charging, whethe...
    more

  • The characteristics and principle analysis of internal resistance of lithium battery

    The characteristics and principle analysis of internal resistance of lithium battery

    Jul , 12 2024
    The internal resistance of the battery is one of the most important characteristic parameters of the battery, which is an important parameter to characterize the battery life and the operating state of the battery, and an important symbol to measure the difficulty of the transmission of electrons and ions in the electrode. The internal resistance also reflects the health of the battery. The intern...
    more

  • Effect of electrolyte density and discharge on lead-acid batteries

    Effect of electrolyte density and discharge on lead-acid batteries

    Nov , 29 2024
    (1) Electrolyte density under different geographical and climatic strips. Whether the electrolyte density is high or low, it is necessary to make a specific analysis for the specific situation. Winter temperature is low, the viscosity of the electrolyte is large, it is not easy to penetrate the inside of the plate, the end voltage and capacity of the battery will decline, especially in the strong ...
    more

  • Irreversible lithium evolution of LiFePO4 batteries at low temperatures and its effect on battery performance degradation

    Irreversible lithium evolution of LiFePO4 batteries at low temperatures and its effect on battery performance degradation

    Dec , 07 2024
    Lithium evolution is the main failure problem faced by lithium-ion batteries during low temperature charging. Due to the low diffusion rate of lithium ions in the solid phase of graphite particles and in the liquid phase of the electrolyte at low temperatures, the negative polarization increases during charging and lithium evolution occurs, and the precipitated lithium metal is divided into revers...
    more
first page << 1 ... 8 9 10 last page

a total of10 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact