log in registered
English

English

what are you looking for?

Blog
Industrial battery charger

b

home |

Industrial battery charger

  • Power Factor and Harmonic Analysis in Single phase AC to DC converter

    Power Factor and Harmonic Analysis in Single phase AC to DC converter

    Aug , 15 2022
    Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part ofmost of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC toDC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is used ...
    more

  • Do Ferro resonant chargers still have a place in battery charging?

    Do Ferro resonant chargers still have a place in battery charging?

    Aug , 15 2022
    One of the larger battery/charger companies selling chargers in the USA have announced that they are no longer manufacturing Ferro resonant chargers and have set 7/31/15 as the last date to accept orders.Is there something wrong with Ferro resonant charging that should make all charger companies follow that lead? Let’s consider Ferro resonant technology. The purpose of a Ferro resonant transformer...
    more

  • Theoretical introduction to Switch mode converters

    Theoretical introduction to Switch mode converters

    Jul , 18 2022
    Switch mode power conversion technology dominates nearly every segment of the economy, including demanding aerospace and military power systems that impose requirements more demanding than those imposed by power utilities or industry. Switch mode converters are, for example, successfully hardened against the effects of frequent lightning strikes on aircraft, against the effects of nuclear electrom...
    more

  • Efficiency of DC power system

    Efficiency of DC power system

    Jun , 27 2022
    In this article we will explain the efficiency of DC systems and progress to AC systems on the next article. In very basic terms, efficiency is the measure of how much power is not being wasted by a system. More waste is less efficient. In electrical systems, we measure the power entering a system in watts; the unit of measure for work performed. Efficiency is the ratio of (Power-In) -vs. - (Power...
    more

  • What types of monitoring and recording devices are suited for high rate charging?

    What types of monitoring and recording devices are suited for high rate charging?

    Jun , 20 2022
    The higher the charging rate, the more critical it is to monitor the charging process to prevent permanent capacity loss. In efforts to preserve battery life, Fast and Opportunity charging incorporates a method of monitoring battery electrolyte temperature and/or internal resistance and adjusting charging current as necessary. Although these monitoring devices can have a very positive impact on ba...
    more

  • What are some key practices for a Fast or Opportunity charge operation?

    What are some key practices for a Fast or Opportunity charge operation?

    Jun , 20 2022
    What are the operational implications of charging at a higher rate? Initial Cost: Initial charger investments may cost up to 5 times more than a conventional charger operation, especially if the charging system utilizes a dedicated charger for every battery. Infrastructure Change: Once committed to the Fast or Opportunity charge process, it can be very difficult to transition back to Conventional ...
    more

  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-3)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-3)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more

  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more

  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-1)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-1)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more
first page << 1 2 3 4 5 6 >> last page

a total of6 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact