log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Failure causes of lithium battery- Failure during charging and discharging

    Failure causes of lithium battery- Failure during charging and discharging

    Oct , 08 2022
    The battery is often overcharged in the process of use. Relatively speaking, the overdischarge situation is less. The heat released during the overcharge or overdischarge process is easy to accumulate inside the battery, which will further increase the battery temperature. , affecting the service life of the battery and increasing the possibility of the battery catching fire or exploding. Even und...
    more

  • Failure causes of lithium battery- Failure in other aspects

    Failure causes of lithium battery- Failure in other aspects

    Oct , 08 2022
    Due to the low intrinsic conductivity of LiFePO4, the morphology and size of the material itself, as well as the influence of conductive agents and binders, are easily manifested. Discussing the two contradictory factors of size and carbon coating , it is found that the impedance of LiFePO4 electrode is only related to the average particle size. The anti-site defect inside LiFePO4 (Fe occupies Li ...
    more

  • What kind of conditions are better for batteries to be stored in?

    What kind of conditions are better for batteries to be stored in?

    Oct , 24 2022
    Can the battery be stored in the appliance after it is used up or if it is not used for a long time? If the electrical appliance will not be used for a long time, it is better to take the battery out and put it in a low temperature and dry place. If not, even if the electrical appliance is turned off, the system will still make the battery have a low current output, which will shorten the battery ...
    more

  • What is round trip efficiency and response time for Energy storage solution?

    What is round trip efficiency and response time for Energy storage solution?

    Oct , 31 2022
    Round-Trip Efficiency Round-trip efficiency takes into consideration energy losses from power conversions and parasitic loads (e.g., electronics, heating and cooling, and pumping) associated with operating the energy storage system. This metric is a key determinant of the cost-effectiveness of energy storage technologies. Among energy storage options, compressed-air energy storage (CAES) has the l...
    more

  • Major Interconnection Issues for Energy storage solution

    Major Interconnection Issues for Energy storage solution

    Oct , 31 2022
    Major Interconnection Issues Generally, DG-based power systems can operate in independent or stand-alone and grid-connected modes. In fact, in the first mode, the capacity of a DG unit is selected only based on the load requirements. But, in the latter case, this constraint is not determinant. Although the grid-connected operation mode usually is preferred due to the bilateral energy exchanges, th...
    more

  • Operation mode of integrated ESS application

    Operation mode of integrated ESS application

    Oct , 31 2022
    Operation mode ESS installed at the new energy power generation side can be operated under the following several modes, each independent from each other and not necessarily multifunctional: 1.    Power variation rate limitation. Power variation rate is limited to a certain range relying on real-time measurement of the output power of a wind power plant. The ESS starts charging when the o...
    more

  • Working principle of a generator side distributed Energy storage system

    Working principle of a generator side distributed Energy storage system

    Oct , 31 2022
    An individual distributed ESS is smaller than an aggregated ESS, because it only handles a single (or a small group) renewable generation unit. Similar to aggregated ESSs, the major function of generator side distributed ESS is to smooth the output of renewables. The distributed ESSs are installed on-site with each renewable generation unit, as illustrated in below figure. A distributed ESS is usu...
    more

  • Why battery energy storage moving to higher DC voltages (Part-1)

    Why battery energy storage moving to higher DC voltages (Part-1)

    Nov , 08 2022
    Today, most utility-scale solar inverters and converters use 1500 VDC input from the solar panels. Matching the energy storage DC voltage with that of the PV eliminates the need to convert battery voltage, resulting in greater space efficiency and avoided equipment costs. The evolution of battery energy storage systems (BESS) is now pushing higher DC voltages in utility scale applications. The Woo...
    more

  • Why battery energy storage moving to higher DC voltages (Part-2)

    Why battery energy storage moving to higher DC voltages (Part-2)

    Nov , 08 2022
    With these new devices, a system designer can expect that the system will be as efficient, reliable, and protected as possible. At ABB we offer an extensive line of higher rated DC components from 600 VDC to 1500 VDC, designed to meet today’s utility BESS requirements. UL-rated 480 VAC to 1000 VAC and 600 VDC to 1500 VDC components are used in the following BESS system components: Battery Manageme...
    more

  • Why Solar and storage are key to reducing geopolitical risk and securing access to energy?

    Why Solar and storage are key to reducing geopolitical risk and securing access to energy?

    Nov , 08 2022
    Energy prices have surged sharply this year due to seeral factors, including the release of pent-up demand post-COVID and supply disruption due to the Russian invasion of Ukraine. The sudden increase in energy prices and its contribution to rising inflation is causing policy distress globally as consumers face soaring costs of living. In the UK, for example, households are experiencing a “cos...
    more

  • Advantages of combining solar and energy storage

    Advantages of combining solar and energy storage

    Nov , 08 2022
    Grid stability, battery safety and blackout prevention Solar-storage solutions can act as sunshine insurance, allowing stored power to be dispensed when power demand is high (and accompanied by higher prices) and solar generation is low. Aided by these smart technologies, unified solar and storage can also help prevent blackouts, an issue seen from Australia to California, Lebanon to South Africa....
    more

  • Barriers to widespread adoption of solar-plus-storage

    Barriers to widespread adoption of solar-plus-storage

    Nov , 08 2022
    The main barrier to widespread adoption of solar-plus-storage is know-how: configuring the optimal design, gauging investment, and navigating risk management (including regulations), and the high complexity and cost of managing these systems. In configuring the optimal system design, one faces challenges such as designing the ideal battery configuration to maximise return on investment (ROI), figu...
    more
first page << 1 ... 7 8 9 10 11 ... 16 >> last page

a total of16 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact