log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Failure causes of lithium battery- Failure during shelving

    Failure causes of lithium battery- Failure during shelving

    Oct , 08 2022
    In the service life of the power battery, most of the time is in a state of shelving. Generally, after a long period of shelving, the performance of the battery will decline, generally showing an increase in internal resistance, a decrease in voltage, and a decrease in discharge capacity. There are many factors that cause the degradation of battery performance, among which temperature, state of ch...
    more

  • Failure causes of lithium battery- Failure during recycling

    Failure causes of lithium battery- Failure during recycling

    Oct , 08 2022
    The battery is generally exothermic during use, so the effect of temperature is very important. In addition, road conditions, usage, ambient temperature, etc. will have different effects. The capacity loss of LiFePO4 power batteries during cycling is generally considered to be caused by the loss of active lithium ions. The research shows that the aging of LiFePO4 power battery during cycling is ma...
    more

  • Failure causes of lithium battery- Failure during charging and discharging

    Failure causes of lithium battery- Failure during charging and discharging

    Oct , 08 2022
    The battery is often overcharged in the process of use. Relatively speaking, the overdischarge situation is less. The heat released during the overcharge or overdischarge process is easy to accumulate inside the battery, which will further increase the battery temperature. , affecting the service life of the battery and increasing the possibility of the battery catching fire or exploding. Even und...
    more

  • Overview of Si-based anode materials

    Overview of Si-based anode materials

    Oct , 17 2022
    The theoretical specific capacity of Si is as high as 4200mAh/g, which is 10 times higher than the theoretical specific capacity of graphite; the lithium intercalation potential of Si is low, which is 0.37mV Li/Li+; and Si is the second most abundant element on the earth, which is not harmful to the environment. Destruction will occur, and the production process of nano-silicon is mature and low-c...
    more

  • What is the 24 hour self discharge test and what precautions should be taken when using a battery?

    What is the 24 hour self discharge test and what precautions should be taken when using a battery?

    Oct , 17 2022
    What are the commonly used standards for batteries? Commonly used IEC standards for batteries: The standard for nickel-metal hydride batteries is IEC61951-2:2003; the lithium- ion battery industry generally follows UL or national standards.In addition, the commonly used standards for batteries also include the Japanese Industrial Standard JIS C standards for batteries. IEC, the International Elect...
    more

  • What is open circuit voltage and what is the capacity of a battery?

    What is open circuit voltage and what is the capacity of a battery?

    Oct , 17 2022
    What is the nominal voltage? The nominal voltage of the battery refers to the voltage displayed during normal operation. The nominal voltage of the secondary nickel-cadmium nickel-hydrogen battery is 1.2V; the nominal voltage of the secondary lithium battery is 3.6V. What is open circuit voltage? The open circuit voltage refers to the potential difference between the positive and negative electrod...
    more

  • What are the reliability and safety test items for batteries?

    What are the reliability and safety test items for batteries?

    Oct , 17 2022
    What are the reliability test items for batteries? 01) Cycle life 02) Discharge characteristics at different rates 03) Discharge characteristics at different temperatures 04) Charging characteristics 05) Self-discharge characteristics 06) Storage characteristics 07) Overdischarge characteristics 08) Internal resistance characteristics at different temperatures 09) Temperature cycle test 10) Drop t...
    more

  • What kind of conditions are better for batteries to be stored in?

    What kind of conditions are better for batteries to be stored in?

    Oct , 24 2022
    Can the battery be stored in the appliance after it is used up or if it is not used for a long time? If the electrical appliance will not be used for a long time, it is better to take the battery out and put it in a low temperature and dry place. If not, even if the electrical appliance is turned off, the system will still make the battery have a low current output, which will shorten the battery ...
    more

  • Are lithium-ion batteries in energy storage systems reliable?

    Are lithium-ion batteries in energy storage systems reliable?

    Dec , 05 2022
    The most common type of battery used in energy storage systems is Lithium-ion batteries. Lithium-ion batteries allow you to take electricity generated by the grid, solar panels, wind turbines, or any combination and store it for use when you need it most. However, not all lithium-ion batteries are the same when it comes to reliability and safety. Even though they are referred to generically as one...
    more

  • Recent market growth and trends of Energy Storage Lithium Batteries in Europe

    Recent market growth and trends of Energy Storage Lithium Batteries in Europe

    Jan , 07 2023
    Lithium-ion battery-based ESS is expected to have the highest market share in 2023. The huge market share can be attributed to its rapid cost decline over the past years and is likely to continue for the next few years. The residential energy storage systems market is majorly dominated by developed nations. However, several other developing countries have introduced the net metering program and ma...
    more

  • Answers to the characteristics of lead-acid batteries

    Answers to the characteristics of lead-acid batteries

    Feb , 16 2023
    1. How AGM vs Lead Acid Batteries Work The AGM battery and the standard lead acid battery are technically the same when it comes to their base chemistry. They both use lead plates and an electrolyte mix of sulfuric acid and water and have a chemical reaction that produces hydrogen and oxygen as a byproduct. However, this is when they start to diverge. Here’s how: A. Flooded Lead Acid Battery The f...
    more

  • Lead-acid battery characteristics

    Lead-acid battery characteristics

    Feb , 24 2023
    Ⅰ： Electromotive force, internal resistance and terminal voltage of lead-acid battery: 1): Electromotive force: refers to the potential difference between the two poles, which depends on the relative density and temperature of the electrolyte.The relative density temperature coefficient of lead-acid battery is 0.00075, that is, the relative density decreases by 0.00075 when the electrolyte tempera...
    more
first page << 1 ... 4 5 6 7 8 9 10 >> last page

a total of10 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact