log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-3)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-3)

    Jul , 04 2022
    1.       Influence of ambient temperature: The following figure shows the battery temperature rise curve (average temperature of 5 sampling points) during 1C charge and discharge process of 55Ah battery at ambient temperatures of 20°C, 27°C and 40°C. From the figure, we can It can be seen that the charging time of the battery at 20°C is 74min and the discharge time is...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 3. Influence of charge and discharge rate The charge and discharge rate characterizes the charge and discharge current of the lithium- ion battery. Therefore, the charge and discharge rate must have a very significant impact on the heat generation power of the lithium-ion battery. , the final temperature and t...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 4. The temperature rise and temperature difference of the battery pack under different working conditions On the basis of the above-mentioned single cell heat generation model, the battery pack model was established by using SOLIDWORKS software to simulate the heat production and the battery pack under differe...
    more

  • Air Transport Requirements for Lithium Ion Batteries

    Air Transport Requirements for Lithium Ion Batteries

    Jul , 11 2022
    Speaking of UN38.3, I believe it will be familiar to those engaged in the lithium battery industry. UN38.3 refers to Section 38.3 of the United Nations Manual of Tests and Criteria for the Transport of Dangerous Goods specially formulated by the United Nations for the transportation of dangerous goods, referred to as UN38.3. , high and low temperature cycle, vibration test, impact test, 55 ℃ exter...
    more

  • Theoretical introduction to Switch mode converters

    Theoretical introduction to Switch mode converters

    Jul , 18 2022
    Switch mode power conversion technology dominates nearly every segment of the economy, including demanding aerospace and military power systems that impose requirements more demanding than those imposed by power utilities or industry. Switch mode converters are, for example, successfully hardened against the effects of frequent lightning strikes on aircraft, against the effects of nuclear electrom...
    more

  • Issues related to Battery for the datacenter application

    Issues related to Battery for the datacenter application

    Jul , 22 2022
    The entire corporate world changed their culture in a very short time, to a predominantly work-from-home model due to Covid-19, many data center and IT professionals have been scrambling to manage this sudden shift in their network demands. The IT sectors are losing many jobs rapidly; the monthly loss is huge in the industry’s history. The news was a harsh reminder that no industry will be spared ...
    more

  • Overview of Lithium Battery Safety Testing- part-2

    Overview of Lithium Battery Safety Testing- part-2

    Aug , 08 2022
    For lithium batteries, there are some popular standards that Battery Lab tests to most often. In this sequel of articles we are going to discuss about these popular standards one by one. Today we are going to discuss about the UL 1642– UL Standard for Safety of Lithium Batteries. UL 1642 These requirements cover primary (no rechargeable) and secondary (rechargeable) lithium batteries for...
    more

  • Safety of Lithium-Ion batteries

    Safety of Lithium-Ion batteries

    Aug , 08 2022
    Lithium-Ion refers to a family of Lithium-based battery technology. This family includes several sub-families or technologies, such as: ·LCO: Lithium Cobalt Oxide ·NCA: Nickel Cobalt Aluminium ·NMC: Nickel Manganese Cobalt ·LiFePO4 or LFP: Lithium Iron Phosphate ·LTO: Lithium Titanate Oxide, etc… Often, we can hear that a product is equipped with “Lithium-Ion” batteries; this does not really have ...
    more

  • Solar battery life time

    Solar battery life time

    Aug , 08 2022
    There are two ways to answer this question and the first is to determine how long a solar battery can power your home. In many cases, a fully charged battery can run your home overnight when your solar panels are not producing energy. To make a more exact calculation, you’ll need to know a few variables, including how much energy your household consumes in a given day, what the capacity and power ...
    more

  • Do Ferro resonant chargers still have a place in battery charging?

    Do Ferro resonant chargers still have a place in battery charging?

    Aug , 15 2022
    One of the larger battery/charger companies selling chargers in the USA have announced that they are no longer manufacturing Ferro resonant chargers and have set 7/31/15 as the last date to accept orders.Is there something wrong with Ferro resonant charging that should make all charger companies follow that lead? Let’s consider Ferro resonant technology. The purpose of a Ferro resonant transformer...
    more

  • Power Factor and Harmonic Analysis in PWM converter

    Power Factor and Harmonic Analysis in PWM converter

    Aug , 15 2022
    Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part of most of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC to DC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is use...
    more

  • Improving Access to Forklift Battery Chargers

    Improving Access to Forklift Battery Chargers

    Aug , 15 2022
    Is the design of your battery room holding your operation back? As valuable as battery room space can be, you need to make sure toprotect access to battery chargers and other crucial equipment when planning your layout. Crowded battery rooms detract significantly from operational efficiency by placing obstacles between workers and the equipment in need of standard maintenance. If a battery charger...
    more
first page << 1 ... 13 14 15 16 17 ... 25 >> last page

a total of25 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact