log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Impact of high temperature on battery safety performance

    Impact of high temperature on battery safety performance

    Mar , 30 2024
    Lithium battery temperature is too high, more than 45℃ Lithium-ion batteries are more and more widely used in people's production and life, which makes its temperature environment become the main point of concern, relatively speaking, lithium batteries are easier to produce safety problems in high temperature environment, therefore, it is necessary to test the high temperature performance of lithi...
    more

  • Influence of self-discharge of lithium battery on lithium battery

    Influence of self-discharge of lithium battery on lithium battery

    Apr , 13 2024
    I. Introduction The existence of self-discharge phenomenon of lithium battery has become an important factor restricting its performance and life. In this paper, the principle, influencing factors and countermeasures of lithium battery self-discharge are discussed. Second, the principle of lithium battery self-discharge Self-discharge refers to the phenomenon that the battery capacity automaticall...
    more

  • Reason analysis of low capacity of lithium battery cell

    Reason analysis of low capacity of lithium battery cell

    Apr , 13 2024
    In the process of lithium battery manufacturing, the capacity of lithium battery cells is sometimes lower than expected, which not only affects the performance of the battery, but also shortens its service life. This paper will deeply analyze the reasons for the low capacity of lithium battery cells, in order to provide reference for related research and production. 1. Excessive and insufficient n...
    more

  • Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

    Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

    Apr , 20 2024
    What impact will the lithium battery have after being put aside for a long time? When the lithium battery is idle, due to the nature of the battery itself, self-discharge, passivation of positive and negative electrode materials, electrolyte decomposition and other phenomena will occur. The instability of the negative SEI will lead to the rapid decline of the negative active substance, which is ea...
    more

  • What is the impact of low temperature on lithium batteries and solutions

    What is the impact of low temperature on lithium batteries and solutions

    Apr , 20 2024
    The use of lithium batteries in low battery temperature environments is limited. In addition to a severe drop in discharge capacity, lithium batteries cannot be charged when the battery temperature is low. When the battery is charged at low temperature, the lithium ion embedment on the battery graphite electrode and the lithium plating reaction exist simultaneously and compete with each other. Und...
    more

  • Uninterruptible Power Supply UPS System for Computers Protection

    Uninterruptible Power Supply UPS System for Computers Protection

    Apr , 26 2024
    What is A UPS System? An Uninterruptible Power Supply (UPS) system is an electrical device that provides emergency power to a computer or other electronic equipment in the event of a power outage or electrical disturbance. It acts as a backup power source, allowing the connected devices to continue functioning for a certain period or providing sufficient time for a safe shutdown. How UPS System fo...
    more

  • How Low Frequency UPS Safeguards Critical Information

    How Low Frequency UPS Safeguards Critical Information

    May , 11 2024
    What is a Low Frequency UPS? A Low Frequency Online UPS is a sophisticated power protection device that utilizes double conversion technology to provide continuous and clean power to connected equipment. Unlike traditional Offline UPS, where the load is directly powered by the mains until a power failure occurs, it continuously powers the load through an inverter, ensuring a seamless transition be...
    more

  • Differences in communication serial ports

    Differences in communication serial ports

    May , 16 2024
    RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...
    more

  • What is a nickel-cadmium battery

    What is a nickel-cadmium battery

    May , 31 2024
    1. Working principle of nickel-cadmium battery Nickel-cadmium batteries are rechargeable batteries that convert chemical energy into electricity through REDOX reactions. It consists of a negative electrode (the negative material is Cd), a positive electrode (the positive material is NiOOH), and an electrolyte (the main component is KOH). 2. Features of nickel-cadmium batteries Long cycle life; Wid...
    more

  • Industrial and commercial energy storage system liquid cooling design

    Industrial and commercial energy storage system liquid cooling design

    Jun , 14 2024
    1. Industrial and commercial energy storage system liquid cooling design For the high-rate charging and discharging process of large-scale battery packs, the cooling capacity of air cooling system can not meet the heat dissipation demand of battery packs. Liquid has a higher specific heat capacity and higher thermal conductivity than air, and the liquid cooling cooling speed is faster, which has a...
    more

  • Differences in communication serial ports

    Differences in communication serial ports

    Jun , 22 2024
    RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...
    more

  • The difference between the first, second, and third levels of distribution boxes

    The difference between the first, second, and third levels of distribution boxes

    Jun , 22 2024
    What do the primary, secondary, and tertiary boxes of a distribution box mean? This is a relative issue. Let's make a hypothesis: a newly built residential area introduces a 10kV incoming line and builds a distribution room. The outgoing line from the low-voltage end of the transformer is 0.4kV to the distribution cabinet (primary distribution cabinet), then the outgoing line is led to the distrib...
    more
first page << 1 ... 26 27 28 29 30 >> last page

a total of30 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact