log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Answers to the characteristics of lead-acid batteries

    Answers to the characteristics of lead-acid batteries

    Feb , 16 2023
    1. How AGM vs Lead Acid Batteries Work The AGM battery and the standard lead acid battery are technically the same when it comes to their base chemistry. They both use lead plates and an electrolyte mix of sulfuric acid and water and have a chemical reaction that produces hydrogen and oxygen as a byproduct. However, this is when they start to diverge. Here’s how: A. Flooded Lead Acid Battery The f...
    more

  • Lead-acid battery characteristics

    Lead-acid battery characteristics

    Feb , 24 2023
    Ⅰ： Electromotive force, internal resistance and terminal voltage of lead-acid battery: 1): Electromotive force: refers to the potential difference between the two poles, which depends on the relative density and temperature of the electrolyte.The relative density temperature coefficient of lead-acid battery is 0.00075, that is, the relative density decreases by 0.00075 when the electrolyte tempera...
    more

  • Effect of ambient temperature on battery life

    Effect of ambient temperature on battery life

    Mar , 01 2023
    1）Temperature will affect battery capacity At different temperatures, the viscosity of the sulfuric acid solution in the battery will be inconsistent. For example, when the battery is at a temperature below 0°C, as the temperature decreases, the resistance of the sulfuric acid solution will continue to increase, which will directly increase the weight of the electrode. The effect of polarization, ...
    more

  • Peak shaving and smart grids: the new frontier of UPS systems

    Peak shaving and smart grids: the new frontier of UPS systems

    Mar , 10 2023
    The way we use UPS systems today has changed a lot. Technological improvements in UPS efficiency, versatility, and flexibility have enabled Borri to approach nonstandard UPS applications such as peaking shaving and power buffering. These techniques are in turn related to UPS systems being able to fulfill the demand for integration into Smart Grids. In this article, we get a closer look at how peak...
    more

  • Cause of low-temperature attenuation of lithium iron phosphate battery

    Cause of low-temperature attenuation of lithium iron phosphate battery

    Mar , 10 2023
    Lithium iron phosphate battery is a common type of lithium-ion battery, which has the advantages of high energy density, long cycle life, and no pollution, so it is widely used in electric vehicles, power tools and other fields. However, in a low-temperature environment, the performance of lithium iron phosphate battery will be degraded to a certain extent. The attenuation of lithium iron phosphat...
    more

  • How Lithium-ion Batteries Work

    How Lithium-ion Batteries Work

    Mar , 23 2023
    Lithium-ion batteries are popular because they have a number of important advantages over competing technologies: They're generally much lighter than other types of rechargeable batteries of the same size. The electrodes of a lithium-ion battery are made of lightweight lithium and carbon. Lithium is also a highly reactive element, meaning that a lot of energy can be stored in its at...
    more

  • What are the factors that are unfavorable to lead-acid batteries?

    What are the factors that are unfavorable to lead-acid batteries?

    Apr , 15 2023
    There are many factors that are unfavorable to the battery, mainly in the charging and discharging phase. (1). The "second super" discharge stage is mainly the discharge current overvalue, that is, the discharge exceeds the allowable current value for a long time; the second problem of discharge is over-discharge, that is, exceeding the allowable discharge capacity of the battery, which is called ...
    more

  • Three-stage charging of lead-acid battery

    Three-stage charging of lead-acid battery

    Apr , 15 2023
    1. What is the three-stage charging of lead-acid batteries? The charging method of lead-acid batteries should be divided into three stages, namely: constant current charging - constant voltage charging - trickle charging. Constant current charging stage: charge to 13.4V with 0.2C10 A current. Constant voltage charging stage: 2.4V/cell, charging time 3h, cut-off current 0.02C10A Trickle charge phas...
    more

  • What are the reasons for the sulfation of lead-acid battery plates?

    What are the reasons for the sulfation of lead-acid battery plates?

    Apr , 15 2023
    The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...
    more

  • How UPS and generator can become the complete critical power solutions

    How UPS and generator can become the complete critical power solutions

    Apr , 19 2023
    How UPS and generator can become the complete critical power solutions with uninterruptible power and backup power supplies？ A UPS can support its critical load during utility power anomalies and blackouts – but only until its battery autonomy expires. Conversely, an adequately-fuelled generator can support the load indefinitely, but needs time to start up and stabilise. Operators of any data cent...
    more

  • Summary of the Design of Power Battery Management system

    Summary of the Design of Power Battery Management system

    Apr , 24 2023
    With the increasing number of electric vehicles, battery energy management system is becoming more and more important in addition to looking for batteries with high energy density and high safety. Different power batteries have different properties, and even if the same type of battery properties are inconsistent, in the process of use, there will be the possibility of accidents caused by expansio...
    more

  • Charge and discharge theory and calculation method design of lithium battery

    Charge and discharge theory and calculation method design of lithium battery

    May , 13 2023
    1 . Production of lithium Ion battery 1 .1 State Of Charge ( state-of-charge; S OC) Soc can be defined as the state of available electrical energy in the battery, usually expressed as a percentage. Because the available electric energy varies with charging and discharging current, temperature, and aging phenomenon, the definition Of the State of Charge is also divided into two types: Absolute stat...
    more
first page << 1 ... 10 11 12 13 14 ... 20 >> last page

a total of20 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact