Blog
  • What is pulse charging and output power of a battery?

    What is pulse charging and output power of a battery?

    Oct , 24 2022
    What is pulse charging? What is the impact on battery performance? Pulse charging generally adopts the method of charging and discharging, that is, charging for 5 seconds and discharging for 1 second, so that most of the oxygen generated during the charging process will be reduced to electrolyte under the discharge pulse. It not only limits the vaporization of the internal electrolyte, but also fo...
    more
  • What are the main factors that affect the battery life?

    What are the main factors that affect the battery life?

    Oct , 24 2022
    What is the rate discharge of the battery? What is the hourly rate discharge of the battery? Rate discharge refers to the rate relationship between discharge current (A) and rated capacity (A•h) during discharge. Hourly rate discharge refers to the number of hours required to discharge the rated capacity according to a certain output current. Can batteries of different capacities be combined? If d...
    more
  • What is the 24-hour self-discharge test and What precautions should be taken when using the battery?

    What is the 24-hour self-discharge test and What precautions should be taken when using the battery?

    Oct , 24 2022
    What is the 24-hour self-discharge test? The self-discharge test of lithium battery is: generally use 24-hour self-discharge to quickly test its charge retention capacity, discharge the battery to 3.0V at 0.2C, charge it to 4.2V at constant current and constant voltage 1C, cut-off current: 10mA, set aside for 15 After one minute, discharge the battery at 1C to 3.0V to measure its discharge capacit...
    more
  • What kind of conditions are better for batteries to be stored in?

    What kind of conditions are better for batteries to be stored in?

    Oct , 24 2022
    Can the battery be stored in the appliance after it is used up or if it is not used for a long time? If the electrical appliance will not be used for a long time, it is better to take the battery out and put it in a low temperature and dry place. If not, even if the electrical appliance is turned off, the system will still make the battery have a low current output, which will shorten the battery ...
    more
  • What are the possible reasons for the zero voltage or low voltage of the single cell and battery pack?

    What are the possible reasons for the zero voltage or low voltage of the single cell and battery pack?

    Oct , 24 2022
    What are the possible reasons for the zero voltage or low voltage of the single cell? 01) External short circuit or overcharge or reverse charge of the battery (forced overdischarge); 02) The battery is continuously overcharged by high rate and high current, resulting in the expansion of the battery pole core, the direct contact of the positive and negative poles, and the short circuit; 03) Intern...
    more
  • What is round trip efficiency and response time for Energy storage solution?

    What is round trip efficiency and response time for Energy storage solution?

    Oct , 31 2022
    Round-Trip Efficiency Round-trip efficiency takes into consideration energy losses from power conversions and parasitic loads (e.g., electronics, heating and cooling, and pumping) associated with operating the energy storage system. This metric is a key determinant of the cost-effectiveness of energy storage technologies. Among energy storage options, compressed-air energy storage (CAES) has the l...
    more
  • Major Interconnection Issues for Energy storage solution

    Major Interconnection Issues for Energy storage solution

    Oct , 31 2022
    Major Interconnection Issues Generally, DG-based power systems can operate in independent or stand-alone and grid-connected modes. In fact, in the first mode, the capacity of a DG unit is selected only based on the load requirements. But, in the latter case, this constraint is not determinant. Although the grid-connected operation mode usually is preferred due to the bilateral energy exchanges, th...
    more
  • Operation mode of integrated ESS application

    Operation mode of integrated ESS application

    Oct , 31 2022
    Operation mode ESS installed at the new energy power generation side can be operated under the following several modes, each independent from each other and not necessarily multifunctional: 1.    Power variation rate limitation. Power variation rate is limited to a certain range relying on real-time measurement of the output power of a wind power plant. The ESS starts charging when the o...
    more
  • Why battery energy storage moving to higher DC voltages (Part-1)

    Why battery energy storage moving to higher DC voltages (Part-1)

    Nov , 08 2022
    Today, most utility-scale solar inverters and converters use 1500 VDC input from the solar panels. Matching the energy storage DC voltage with that of the PV eliminates the need to convert battery voltage, resulting in greater space efficiency and avoided equipment costs. The evolution of battery energy storage systems (BESS) is now pushing higher DC voltages in utility scale applications. The Woo...
    more
  • Why Solar and storage are key to reducing geopolitical risk and securing access to energy?

    Why Solar and storage are key to reducing geopolitical risk and securing access to energy?

    Nov , 08 2022
    Energy prices have surged sharply this year due to seeral factors, including the release of pent-up demand post-COVID and supply disruption due to the Russian invasion of Ukraine. The sudden increase in energy prices and its contribution to rising inflation is causing policy distress globally as consumers face soaring costs of living. In the UK, for example, households are experiencing a “cos...
    more
  • Advantages of combining solar and energy storage

    Advantages of combining solar and energy storage

    Nov , 08 2022
    Grid stability, battery safety and blackout prevention Solar-storage solutions can act as sunshine insurance, allowing stored power to be dispensed when power demand is high (and accompanied by higher prices) and solar generation is low. Aided by these smart technologies, unified solar and storage can also help prevent blackouts, an issue seen from Australia to California, Lebanon to South Africa....
    more
  • Barriers to widespread adoption of solar-plus-storage

    Barriers to widespread adoption of solar-plus-storage

    Nov , 08 2022
    The main barrier to widespread adoption of solar-plus-storage is know-how: configuring the optimal design, gauging investment, and navigating risk management (including regulations), and the high complexity and cost of managing these systems. In configuring the optimal system design, one faces challenges such as designing the ideal battery configuration to maximise return on investment (ROI), figu...
    more
first page << 1 ... 20 21 22 23 24 ... 36 >> last page

a total of36 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact