log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

    Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

    Apr , 20 2024
    What impact will the lithium battery have after being put aside for a long time? When the lithium battery is idle, due to the nature of the battery itself, self-discharge, passivation of positive and negative electrode materials, electrolyte decomposition and other phenomena will occur. The instability of the negative SEI will lead to the rapid decline of the negative active substance, which is ea...
    more

  • What is the impact of low temperature on lithium batteries and solutions

    What is the impact of low temperature on lithium batteries and solutions

    Apr , 20 2024
    The use of lithium batteries in low battery temperature environments is limited. In addition to a severe drop in discharge capacity, lithium batteries cannot be charged when the battery temperature is low. When the battery is charged at low temperature, the lithium ion embedment on the battery graphite electrode and the lithium plating reaction exist simultaneously and compete with each other. Und...
    more

  • Lead-acid battery failure model

    Lead-acid battery failure model

    May , 11 2024
    The most common failure modes are:   - Softening or shedding of the active material.  During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide.    Corrosion...
    more

  • Advantages of Nickel-Cadmium Batteries

    Advantages of Nickel-Cadmium Batteries

    May , 31 2024
    Ni-Cd batteries have been around nearly as long as lead-acid. Commercial products have been available since around 19007. Pocket plate designs are typically used for long to high current types, while fiber plates are used for extremely high current short demand applications like engine starting.   While Ni-Cd batteries typically cost many times what a comparable lead-acid does, their characte...
    more

  • What is a nickel-cadmium battery

    What is a nickel-cadmium battery

    May , 31 2024
    1. Working principle of nickel-cadmium battery Nickel-cadmium batteries are rechargeable batteries that convert chemical energy into electricity through REDOX reactions. It consists of a negative electrode (the negative material is Cd), a positive electrode (the positive material is NiOOH), and an electrolyte (the main component is KOH). 2. Features of nickel-cadmium batteries Long cycle life; Wid...
    more

  • Influence of lithium analysis on battery capacity

    Influence of lithium analysis on battery capacity

    Jun , 27 2024
    I. Introduction The phenomenon of lithium evolution is an important problem affecting the capacity of lithium batteries. This article will discuss the impact of lithium analysis on battery capacity with you in detail, and analyze its causes and solutions. Second, the impact of lithium on battery capacity 1. Loss of active lithium ions Lithium evolution causes some of the lithium ions to form lithi...
    more

  • Analysis and application of charge and discharge curve of lithium battery

    Analysis and application of charge and discharge curve of lithium battery

    Jun , 27 2024
    Abstract: In this paper, the analysis method of charge and discharge curve of lithium battery is introduced in detail, including charge efficiency, discharge characteristics, capacity evaluation, internal resistance evaluation and cycle life evaluation. Through the interpretation of the charge and discharge curve, the performance and characteristics of lithium batteries can be deeply understood, w...
    more

  • The characteristics and principle analysis of internal resistance of lithium battery

    The characteristics and principle analysis of internal resistance of lithium battery

    Jul , 12 2024
    The internal resistance of the battery is one of the most important characteristic parameters of the battery, which is an important parameter to characterize the battery life and the operating state of the battery, and an important symbol to measure the difficulty of the transmission of electrons and ions in the electrode. The internal resistance also reflects the health of the battery. The intern...
    more

  • Overvoltage protection and undervoltage protection principle of lithium battery

    Overvoltage protection and undervoltage protection principle of lithium battery

    Jul , 12 2024
    1, lithium battery protection board composition The general lithium battery protection board is composed of a control IC, a MOS tube, a resistance capacitor, and a FUSE, as shown in the following figure 1, overcharge protection principle When the battery is charged, the current (direction shown by the arrow) flows into the positive electrode of the battery pack and flows out of the negative electr...
    more

  • Effect of electrolyte density and discharge on lead-acid batteries

    Effect of electrolyte density and discharge on lead-acid batteries

    Nov , 29 2024
    (1) Electrolyte density under different geographical and climatic strips. Whether the electrolyte density is high or low, it is necessary to make a specific analysis for the specific situation. Winter temperature is low, the viscosity of the electrolyte is large, it is not easy to penetrate the inside of the plate, the end voltage and capacity of the battery will decline, especially in the strong ...
    more

  • Irreversible lithium evolution of LiFePO4 batteries at low temperatures and its effect on battery performance degradation

    Irreversible lithium evolution of LiFePO4 batteries at low temperatures and its effect on battery performance degradation

    Dec , 07 2024
    Lithium evolution is the main failure problem faced by lithium-ion batteries during low temperature charging. Due to the low diffusion rate of lithium ions in the solid phase of graphite particles and in the liquid phase of the electrolyte at low temperatures, the negative polarization increases during charging and lithium evolution occurs, and the precipitated lithium metal is divided into revers...
    more

  • Lithium battery life The reason for the slow charging speed

    Lithium battery life The reason for the slow charging speed

    Dec , 13 2024
    1. Electrical problems: Insufficient power of the charger is one of the common reasons for slow charging speed. If the output current of the charger used is small and cannot meet the maximum charging current requirements of the battery, the charging speed will be limited. For example, a lithium battery mobile phone that supports fast charging, the original charger output current is 3A, and the cha...
    more
first page << 1 ... 15 16 17 18 >> last page

a total of18 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact