log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Overview of the lithium battery formation process

    Overview of the lithium battery formation process

    Sep , 05 2022
    Lithium- ion battery formation process includes constant current, constant voltage and intelligent charging. The polarization phenomenon of constant current charging is serious, and its initial current is low, the current at the end of charging is high, the charging time is long, the energy waste is serious, and the battery life will be reduced. During constant voltage charging, the current is rel...
    more

  • Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

    Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

    Sep , 05 2022
    1. Energy density: The energy density of ternary lithium is about 1.7 times that of lithium iron phosphate, so the volume and weight of ternary lithium batteries will be smaller than those of lithium iron phosphate batteries, and the car load will be smaller. 2. Safety performance: lithium iron phosphate battery will perform better in acupuncture test, and in high temperature environment, the stab...
    more

  • Effect of formation current density on battery performance

    Effect of formation current density on battery performance

    Sep , 13 2022
    When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...
    more

  • Things to keep in mind when installing UPS

    Things to keep in mind when installing UPS

    Sep , 19 2022
    During the installation of a UPS system we need to be careful about some certain factors which can hamper our entire operation and threat the reliability of the system. In this series of technical article we are going to explain 12 major problems that need to be paid attention to when installing a UPS system.  In this article we are going to explain second 6 of the major problems: 7. Use envi...
    more

  • How a UPS system works with a Generator

    How a UPS system works with a Generator

    Sep , 19 2022
    As weather extremes and storms increase, power outages are likely to continue to rise. According to the U.S. Energy Information Administration, U.S. customers experienced an average of nearly six hours of power interruptions in 2018. If you have invested in a generator, you’ve prepared for when a storm hits, right? Almost. Even with a generator, you still need a battery backup, also known as an Un...
    more

  • Key Factors in Choosing the Right UPS

    Key Factors in Choosing the Right UPS

    Sep , 26 2022
    You rely on your UPS system for backup if your power goes out, right? But does your UPS have your back? That is, will it provide a bridge of power long enough for what you need? At the very least you will want to save your data and perform a safe shutdown. Your UPS backup battery will only provide power for a set amount of time, known as runtime. In this article, we will provide a step-by-step app...
    more

  • Failure causes of lithium battery- Failure in the production process

    Failure causes of lithium battery- Failure in the production process

    Oct , 08 2022
    In the production process, personnel, equipment, raw materials, methods, and the environment are the main factors that affect product quality, and the production process of LiFePO4 power batteries is no exception. Personnel and equipment belong to the category of management, so we mainly discuss the last three influences factor. Failure of batteries caused by impurities in electrode active materia...
    more

  • Failure causes of lithium battery- Failure during shelving

    Failure causes of lithium battery- Failure during shelving

    Oct , 08 2022
    In the service life of the power battery, most of the time is in a state of shelving. Generally, after a long period of shelving, the performance of the battery will decline, generally showing an increase in internal resistance, a decrease in voltage, and a decrease in discharge capacity. There are many factors that cause the degradation of battery performance, among which temperature, state of ch...
    more

  • Failure causes of lithium battery- Failure during recycling

    Failure causes of lithium battery- Failure during recycling

    Oct , 08 2022
    The battery is generally exothermic during use, so the effect of temperature is very important. In addition, road conditions, usage, ambient temperature, etc. will have different effects. The capacity loss of LiFePO4 power batteries during cycling is generally considered to be caused by the loss of active lithium ions. The research shows that the aging of LiFePO4 power battery during cycling is ma...
    more

  • Failure causes of lithium battery- Failure during charging and discharging

    Failure causes of lithium battery- Failure during charging and discharging

    Oct , 08 2022
    The battery is often overcharged in the process of use. Relatively speaking, the overdischarge situation is less. The heat released during the overcharge or overdischarge process is easy to accumulate inside the battery, which will further increase the battery temperature. , affecting the service life of the battery and increasing the possibility of the battery catching fire or exploding. Even und...
    more

  • Failure causes of lithium battery- Failure in other aspects

    Failure causes of lithium battery- Failure in other aspects

    Oct , 08 2022
    Due to the low intrinsic conductivity of LiFePO4, the morphology and size of the material itself, as well as the influence of conductive agents and binders, are easily manifested. Discussing the two contradictory factors of size and carbon coating , it is found that the impedance of LiFePO4 electrode is only related to the average particle size. The anti-site defect inside LiFePO4 (Fe occupies Li ...
    more

  • Overview of Si-based anode materials

    Overview of Si-based anode materials

    Oct , 17 2022
    The theoretical specific capacity of Si is as high as 4200mAh/g, which is 10 times higher than the theoretical specific capacity of graphite; the lithium intercalation potential of Si is low, which is 0.37mV Li/Li+; and Si is the second most abundant element on the earth, which is not harmful to the environment. Destruction will occur, and the production process of nano-silicon is mature and low-c...
    more
first page << 1 ... 16 17 18 19 20 ... 33 >> last page

a total of33 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact