The voltage stabilizer can be widely used in: electronic computers, precision machine tools, computed tomography (CT), precision instruments, test devices, Elevator lighting, imported equipment and production lines and other places that require stable voltage of the power supply. So what are the procedures for using the voltage regulator correctly?

Turn on the power switch of the voltage stabilizer, wait for the working indicator light and the delay indicator light to light up, observe whether the indicator light indicates 220V normally, when the output voltage is about 220V, then turn on the power switch of the electrical equipment, which means that the voltage stabilizer can automatically Adjust the voltage and supply power normally. Remember to go out for a long time and turn off all power switches and the power switch of the voltage stabilizer when the electrical equipment at home is not used for a long time to reduce power consumption and prolong the service life of the voltage stabilizer.

Check whether the voltage stabilizer is damaged or not. You should check the casing, meter, switch, indicator light, button, wiring terminal, etc. separately, and make sure there is no damage before use. Then plug the input end of the voltage stabilizer into the power strip, and install a fuse that matches the power of the device to ensure the safety of electricity. Then connect the power supply of the electrical equipment to the output terminal of the equipment. There is a point to pay attention to. Check whether the applicable voltage of the electrical appliance is 220V or 110V, and do not make a mistake.

The voltage stabilizer cannot be overloaded. When the voltage is low, the load of the voltage stabilizer should be reduced accordingly, some electrical facilities should be turned off, and too many devices should not be used at the same time. The cross-section of the wire connected to the voltage regulator should be large, and the screws at the port should be tightened as much as possible to avoid heating at the connection and reduce voltage drop. After all the input and output lines are connected, first turn off the power switch of the connected electrical appliances, then turn on the voltage stabilizer, check that the output voltage is normal, and then turn on the power switch of the load.

Note: When household appliances are running together with refrigerators, air conditioners and other equipment, a voltage stabilizer with a capacity of more than 3 times should be selected to avoid the equipment starting current exceeding the voltage stabilizer current, causing the voltage stabilizer fuse to blow or short-circuit tripping and unable to work.

If you have any requirements or any kind of query regarding the Automatic Voltage Regulator (AVR) solutions for your desired applications, feel free to communicate with our dedicated team at any time at marketing@everexceed.com.