log in registered
English

English

what are you looking for?

Blog
Critical power

b

home |

Critical power

  • The Importance of Data Centers

    The Importance of Data Centers

    Jul , 22 2022
    What Is A Data Center? In simplistic terms, a data center is fundamentally a huge computer that stores and processes information. They represent a physical facility that companies use to house their critical applications and data. Their design is based on a network of computing and storage resources that enable the delivery of shared applications and data. Any company or organization that handles ...
    more

  • Theoretical introduction to an AC power system

    Theoretical introduction to an AC power system

    Jul , 22 2022
    AC Power Systems have plenty more units, terms, measurements, interesting waveforms and math to describe their behavior. Any formulas presented here are for reference and validation only. The intension of this paperis convey the concept without having to seriously crunch numbers. All the terms and formulas interweave so itis difficult to create a flow of one topic to another without skipping aroun...
    more

  • Theoretical introduction to Switch mode converters

    Theoretical introduction to Switch mode converters

    Jul , 18 2022
    Switch mode power conversion technology dominates nearly every segment of the economy, including demanding aerospace and military power systems that impose requirements more demanding than those imposed by power utilities or industry. Switch mode converters are, for example, successfully hardened against the effects of frequent lightning strikes on aircraft, against the effects of nuclear electrom...
    more

  • Effect of input capacitors between UPS and Generator

    Effect of input capacitors between UPS and Generator

    Jul , 18 2022
    Input capacitors used for filtering purpose cause pure apparent power to flow between the supply and the UPS. Such power is referred to as leading or capacitive power. Gensets can manage limited amount of pure leading power, as it interferes with the excitation circuit in the AC generator, leading to voltage oscillations and genset’s shutdown. Safe operating area charts show the allowed gensets’ l...
    more

  • How to have UPS and generators getting along?

    How to have UPS and generators getting along?

    Jul , 18 2022
    As a rule of thumb, a genset continuous power rating should not be less than 1.5 times the UPS nominal power. The oversizing factor accounts for UPS efficiency, typically 96%, UPS power factor, typically 0.99, input harmonic distortion, typically 3% and adds up a power safety margin to prevent load steps from triggering a non-stable response in the genset’s output voltage. As mentioned above, thou...
    more

  • Relation between UPS and Generators

    Relation between UPS and Generators

    Jul , 18 2022
    UPS and generators should be best friends, smoothly cooperating to improve site’s resiliency. Often this might not be the case, due to mutual misunderstandings and lack of information. This article is a comprehensive guide and essential knowledge base about UPS input performance and its impact on generators’ operation. The UPS point of view： In real operation, whenever a mains failure occurs, the ...
    more

  • Air Transport Requirements for Lithium Ion Batteries

    Air Transport Requirements for Lithium Ion Batteries

    Jul , 11 2022
    Speaking of UN38.3, I believe it will be familiar to those engaged in the lithium battery industry. UN38.3 refers to Section 38.3 of the United Nations Manual of Tests and Criteria for the Transport of Dangerous Goods specially formulated by the United Nations for the transportation of dangerous goods, referred to as UN38.3. , high and low temperature cycle, vibration test, impact test, 55 ℃ exter...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 4. The temperature rise and temperature difference of the battery pack under different working conditions On the basis of the above-mentioned single cell heat generation model, the battery pack model was established by using SOLIDWORKS software to simulate the heat production and the battery pack under differe...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 3. Influence of charge and discharge rate The charge and discharge rate characterizes the charge and discharge current of the lithium- ion battery. Therefore, the charge and discharge rate must have a very significant impact on the heat generation power of the lithium-ion battery. , the final temperature and t...
    more
first page << 1 ... 37 38 39 40 41 ... 67 >> last page

a total of67 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

Shenzhen EverExceed Industrial Co., Ltd

copyright © 2025 Shenzhen EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact