Blog
  • Lithium battery capacity loss cause analysis

    Lithium battery capacity loss cause analysis

    Jun , 21 2023
    Lithium-ion batteries are the fastest-developing secondary batteries after cadmium-nickel and nickel-hydrogen batteries. Its high-energy properties make its future look bright. However, lithium-ion batteries are not perfect, and their biggest problem is the stability of their charge-discharge cycle. This paper summarizes and analyzes the possible causes of capacity attenuation of Li-ion batteries,...
    more
  • 8 major functions of UPS power supply

    8 major functions of UPS power supply

    Aug , 18 2023
    The uninterrupted power supply is an uninterrupted power supply containing an energy storage device and a constant voltage constant frequencies with the inverter as the main part. Its main function is to provide uninterrupted power supply for single computers, computer network systems, or other power electronics equipment. When the city power input is normal, the UPS uninterrupted power supply pro...
    more
  • Important performance of the battery

    Important performance of the battery

    Sep , 04 2023
    1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...
    more
  • Why only online UPS topology provides mission critical load protection

    Why only online UPS topology provides mission critical load protection

    Sep , 09 2023
    Why does only online UPS topology provides mission critical load protection? Modern, static UPS systems are broadly classified into three design architectures: on-line, off-line and line interactive. This post describes and compares the three types and explains why – for truly critical loads – online ups topology is the only acceptable approach. Facility executives today face increased demands for...
    more
  • What are the application fields of inverter and its application in building materials industry

    What are the application fields of inverter and its application in building materials industry

    Oct , 16 2023
    ●What are the application fields of inverter? The most important function of installing inverter power supply is to adjust the speed of AC motor, with good speed regulation effect, high performance, safety and reliability, simple operation and universal system. Because of these advantages, it is suitable for many industries and is promoted. The application fields of inverter power supply...
    more
  • Inverter energy storage system on the role

    Inverter energy storage system on the role

    Oct , 27 2023
    First, the basic principle of inverter Inverter is a device that converts direct current to alternating current, its main principle is to use the switching characteristics of semiconductor devices (such as field effect tubes or thyristors, etc.) to control the power supply voltage and current through rapid switching, so as to achieve the conversion of direct current to the corresponding frequency ...
    more
  • Common methods in inverter operation command sources, programmable control inputs

    Common methods in inverter operation command sources, programmable control inputs

    Nov , 10 2023
    In addition to the frequency signal, there are two basic conditions for the operation of an inverter power supply, which are the operating signal of the inverter power supply. Common methods in the source of inverter operation commands The operation commands of the inverter power supply include start, stop, forward and reverse, forward and reverse, reset, etc. Like the pre rate setting mode of pow...
    more
  • Ground Design

    Ground Design

    Nov , 10 2023
    1、Introduction In the process of circuit design, grounding is a commonplace issue. The grounding method needs to be based on specific usage scenarios, and there is no universal grounding method. In this article, we will explain the essence of grounding issues, which is worth savoring carefully. 2、Classification of grounding The same hardware circuit may also have differences in grounding methods i...
    more
  • Comparison of advantages and disadvantages between half bridge circuit and full bridge circuit

    Comparison of advantages and disadvantages between half bridge circuit and full bridge circuit

    Nov , 25 2023
    The form of the half bridge inverter power conversion main circuit is shown in the following figure: By analyzing the withstand voltage of the switch tube and the primary voltage of the transformer when two switch tubes are alternately turned on and off using a sequential circuit, it is known that the required withstand voltage of the switch tube is Vac; The primary voltage of the transformer is 1...
    more
  • Explanation of inverter harmonic control, increasing internal resistance of inverter power supply

    Explanation of inverter harmonic control, increasing internal resistance of inverter power supply

    Nov , 29 2023
    Due to its small size, light weight, low cost, and high efficiency, inverter power sources are highly favored in various production fields, especially in fields such as fans, water pumps, and transmission systems. Although the application of inverter power has produced significant energy-saving effects, the accompanying harmonic problems cannot be ignored. Inverter harmonic control instructions Th...
    more
  • Working principle of lead-acid battery

    Working principle of lead-acid battery

    Dec , 23 2023
    1. The generation of electromotive force of lead-acid batteries After the lead-acid battery is charged, the positive plate lead dioxide (PbO2), under the action of water molecules in the sulfuric acid solution, a small amount of lead dioxide and water produce dissociable unstable substances - lead hydroxide (Pb (OH) 4), hydroxide ions in the solution, lead ions (Pb4) remain on the positive plate, ...
    more
  • How to judge the quality of an inverter, considering quality and cost

    How to judge the quality of an inverter, considering quality and cost

    Dec , 23 2023
    This requires us to have a keen eye and carefully observe the external technology and internal strength of the inverter when choosing it. Inverter identification method: How to judge the quality of an inverter The first thing that power inverters give people is the visual impact of their appearance, just like a phone, giving them a first impression. A good inverter has a novel appearance and a uni...
    more
first page << 1 2 3 4 5 6 >> last page

a total of6 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact