log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • The Role of AC Capacitors in High Speed Circuits

    The Role of AC Capacitors in High Speed Circuits

    Aug , 18 2023
    1、Introduction For low-frequency circuits, resistors and capacitors can be analyzed as ideal devices. However, in high-frequency circuits, these two devices will not be "ideal". Today, our main discussion is about the issue of AC capacitors, which are commonly known as AC coupling capacitors. Their main function is to filter out the DC component of the signal, which is symmetrical about the X-axis...
    more

  • Lithium-ion battery terms explained

    Lithium-ion battery terms explained

    Aug , 18 2023
    I. Battery voltage (V) 1. Open circuit voltage (OCV) The voltage of the lithium battery when it is not connected to an external circuit or load can generally be tested with a multimeter. 2. Operating voltage (WV) The potential difference between the positive and negative terminals of the battery under applied load, that is, when there is current flowing through the battery in the circuit. When the...
    more

  • Why choose gel batteries?

    Why choose gel batteries?

    Aug , 22 2023
    The colloidal lead-acid battery is an improvement of the ordinary lead-acid battery with liquid electrolyte. The sulfuric acid electrolyte is replaced by a colloidal electrolyte, and the safety, power storage, discharge performance, and service life are improved compared with the ordinary battery. The colloidal lead-acid battery adopts a gel-like electrolyte; no free liquid is inside. Under the sa...
    more

  • Characteristics of using UPS power supply in computer rooms

    Characteristics of using UPS power supply in computer rooms

    Aug , 25 2023
    1.Due to the small initial load, there may be expansion in the later stage.Redundant design is required, and load shutdown is not allowed during expansion. 2.It can be used in conjunction with the original generator as a power sourceor distribution for fault configurations to ensure smooth power supply. 3.When a UPS fails, the battery of the faulty UPS can be transferred to othernormally operating...
    more

  • UPS power supply power supply method and daily use precautions

    UPS power supply power supply method and daily use precautions

    Aug , 29 2023
    Today, whether it is a computer room or a data center, UPS power supply has played a vital position. When the UPS power supply is power supply in the municipal power, it is the role of the voltage regulator and filter to ensure the normal operation of the equipment; when the municipal power is interrupted, it can provide it by providing its DC power supply part (battery pack, diesel generator, etc...
    more

  • Important performance of the battery

    Important performance of the battery

    Sep , 04 2023
    1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...
    more

  • Lead-acid battery thermal runaway failure analysis when the battery is in the state of charge

    Lead-acid battery thermal runaway failure analysis when the battery is in the state of charge

    Sep , 04 2023
    Lead acid battery thermal runaway fault analysis When the battery is charged: There is a cumulative increase in battery temperature. When the heat accumulates to a certain extent during the warming process, the battery terminal voltage will suddenly decrease, forcing the current to increase suddenly, and the phenomenon of high battery temperature and damage to the battery is called thermal runaway...
    more

  • Effect of temperature on the performance of lead-acid batteries

    Effect of temperature on the performance of lead-acid batteries

    Sep , 18 2023
    What are the effects of temperature on the performance of lead-acid batteries? From the chemical reaction equation of lead-acid batteries, PbO2 is on the positive plate, and Pb is on the negative plate. The electrical and physical properties of these two substances vary very little with temperature, so it can be said that the temperature effect of the discharge performance of lead-acid batteries i...
    more

  • How do lithium batteries screen distribution groups?

    How do lithium batteries screen distribution groups?

    Sep , 19 2023
    The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...
    more

  • The function and operation method of UPS power supply are not affected by voltage interference

    The function and operation method of UPS power supply are not affected by voltage interference

    Oct , 08 2023
    UPS power supply is a type of power protection device mainly used to protect electronic devices (such as computers, servers, etc.) from damage during power outages or voltage instability. The function of UPS power supply: 1.Protect electronic devices from power outages and voltage fluctuations. 2.In the event of a power outage, the UPS power supply can continue to supply power,ensuring the normal ...
    more

  • How to classify UPS power supplies based on their principles and strong software functions

    How to classify UPS power supplies based on their principles and strong software functions

    Oct , 08 2023
    There are various types of UPS power supplies available in the market today, with output power ranging from 500VA to 4800KVA (multiple units in parallel). UPS power supply can be divided into three categories according to its working principle: backup UPS, online interactive UPS, and online UPS; According to the output waveform, it can be divided into two types: square wave output UPS and sine wav...
    more

  • What is the difference between the 8/20us waveform and the 10/350us waveform in surge protective devices (SPD)

    What is the difference between the 8/20us waveform and the 10/350us waveform in surge protective devices (SPD)

    Oct , 08 2023
    The surge protector has an important parameter, 8/20us or 10/350us, which many people are unaware of. The main function of the surge protector is to respond to lightning strikes, including direct and induced lightning. The forms of direct lightning and inductive lightning have different energies, and their current waveforms are similar to 10/350us (direct lightning) and 8/20us (inductive lightning...
    more
first page << 1 ... 23 24 25 26 27 ... 32 >> last page

a total of32 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact