log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Lead-acid battery thermal runaway failure analysis when the battery is in the state of charge

    Lead-acid battery thermal runaway failure analysis when the battery is in the state of charge

    Sep , 04 2023
    Lead acid battery thermal runaway fault analysis When the battery is charged: There is a cumulative increase in battery temperature. When the heat accumulates to a certain extent during the warming process, the battery terminal voltage will suddenly decrease, forcing the current to increase suddenly, and the phenomenon of high battery temperature and damage to the battery is called thermal runaway...
    more

  • Effect of temperature on the performance of lead-acid batteries

    Effect of temperature on the performance of lead-acid batteries

    Sep , 18 2023
    What are the effects of temperature on the performance of lead-acid batteries? From the chemical reaction equation of lead-acid batteries, PbO2 is on the positive plate, and Pb is on the negative plate. The electrical and physical properties of these two substances vary very little with temperature, so it can be said that the temperature effect of the discharge performance of lead-acid batteries i...
    more

  • How do lithium batteries screen distribution groups?

    How do lithium batteries screen distribution groups?

    Sep , 19 2023
    The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...
    more

  • The function and operation method of UPS power supply are not affected by voltage interference

    The function and operation method of UPS power supply are not affected by voltage interference

    Oct , 08 2023
    UPS power supply is a type of power protection device mainly used to protect electronic devices (such as computers, servers, etc.) from damage during power outages or voltage instability. The function of UPS power supply: 1.Protect electronic devices from power outages and voltage fluctuations. 2.In the event of a power outage, the UPS power supply can continue to supply power,ensuring the normal ...
    more

  • How to classify UPS power supplies based on their principles and strong software functions

    How to classify UPS power supplies based on their principles and strong software functions

    Oct , 08 2023
    There are various types of UPS power supplies available in the market today, with output power ranging from 500VA to 4800KVA (multiple units in parallel). UPS power supply can be divided into three categories according to its working principle: backup UPS, online interactive UPS, and online UPS; According to the output waveform, it can be divided into two types: square wave output UPS and sine wav...
    more

  • What is the difference between the 8/20us waveform and the 10/350us waveform in surge protective devices (SPD)

    What is the difference between the 8/20us waveform and the 10/350us waveform in surge protective devices (SPD)

    Oct , 08 2023
    The surge protector has an important parameter, 8/20us or 10/350us, which many people are unaware of. The main function of the surge protector is to respond to lightning strikes, including direct and induced lightning. The forms of direct lightning and inductive lightning have different energies, and their current waveforms are similar to 10/350us (direct lightning) and 8/20us (inductive lightning...
    more

  • Micropore system anatomy of AGM clapboard

    Micropore system anatomy of AGM clapboard

    Oct , 11 2023
    The performance characteristics of VRLA batteries are largely determined by the capillary characteristics of the AGM separator, that is, the ability to keep the micropores in the thickness direction of the separator filled with electrolyte and prevent the electrolyte from drying out and causing delamination. These properties are influenced by the micropore structure, especially the micropore distr...
    more

  • Lithium battery performance key indicators - internal resistance knowledge

    Lithium battery performance key indicators - internal resistance knowledge

    Oct , 13 2023
    First, the definition and role of internal resistance (1) Definition of internal resistance Internal resistance refers to the resistance encountered by the current passing through the inside of the lithium battery during discharge or charging. It is determined by the conductivity of the material inside the battery, the ion transport rate of the electrolyte, the contact resistance between the elect...
    more

  • The role and importance of AGM partitions

    The role and importance of AGM partitions

    Oct , 19 2023
    AGM separator and transfer reaction between positive and negative plates Structure and function of partitions The AGM partitions used by VRLA have the following additional functions: Absorb the electrolyte (the third active substance of the battery) so that it does not flow. Provides a relatively large gas transfer hole for oxygen diffusion and thus facilitates the operation of the COC. High ionic...
    more

  • Lithium battery internal resistance - AC resistance and DC resistance

    Lithium battery internal resistance - AC resistance and DC resistance

    Oct , 27 2023
    Resistance is a physical quantity that characterizes the degree of obstruction of circuit elements to current transmission. The internal resistance (internal resistance) of lithium batteries is one of the important indicators to evaluate the performance of batteries. In practical applications, the internal resistance of lithium batteries has three important roles: 1. It can be used to evaluate the...
    more

  • Method for providing the service life of valve-controlled closed lead acid Battery (VRLA)?

    Method for providing the service life of valve-controlled closed lead acid Battery (VRLA)?

    Nov , 03 2023
    1 Temperature affects battery life: thermal runaway causes temperature rise: Valve-controlled closed lead-acid battery (VRLA) charging when the internal gas recombination itself is an exothermal reaction, so that the battery temperature rises, floating charge flow increases, the gas evolution increases, and the battery temperature rises higher, the battery itself is a "poor liquid", tightly assemb...
    more

  • Comparison of advantages and disadvantages of various energy storage systems

    Comparison of advantages and disadvantages of various energy storage systems

    Nov , 11 2023
    1. Lithium-ion batteries "Lithium battery" is a class of lithium metal or lithium alloy as a negative electrode material, the use of non-aqueous electrolyte solution of the battery, due to the chemical characteristics of lithium metal is very active, so that the processing of lithium metal, preservation, use, the environmental requirements are very high. With the development of science and technol...
    more
first page << 1 ... 20 21 22 23 24 25 26 >> last page

a total of26 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact