Blog
  • The difference between energy storage converter and grid-connected inverter

    The difference between energy storage converter and grid-connected inverter

    Apr , 26 2024
    Energy Storage Converter Energy storage converters (PCS), also known as "bi-directional energy storage inverters", are the core components of the two-way flow of electricity between the energy storage system and the grid, and are used to control the charging and discharging processes of the battery, and to perform the conversion of AC and DC currents. In the absence of grid, it can directly supply...
    more
  • Lead-acid battery failure model

    Lead-acid battery failure model

    May , 11 2024
    The most common failure modes are:   - Softening or shedding of the active material.  During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide.    Corrosion...
    more
  • Inverter common fault contents and solutions

    Inverter common fault contents and solutions

    May , 11 2024
    As an important component of the entire power plant, inverters can detect almost all power plant parameters for both DC components and grid connected equipment. If there is an abnormality, the health status of the supporting equipment in the power station can be checked through the feedback information from the inverter. Below are some common fault information and handling methods for photovoltaic...
    more
  • Advantages of Nickel-Cadmium Batteries

    Advantages of Nickel-Cadmium Batteries

    May , 31 2024
    Ni-Cd batteries have been around nearly as long as lead-acid. Commercial products have been available since around 19007. Pocket plate designs are typically used for long to high current types, while fiber plates are used for extremely high current short demand applications like engine starting.   While Ni-Cd batteries typically cost many times what a comparable lead-acid does, their characte...
    more
  • Factors affecting photovoltaic inverters

    Factors affecting photovoltaic inverters

    Jun , 22 2024
    1. The impact of altitude on photovoltaic inverters Altitude has a certain impact on the performance and reliability of photovoltaic inverters. As the altitude increases, the air pressure decreases and the air density decreases, which will lead to a decrease in the heat dissipation capacity of the photovoltaic inverter. In addition, the climatic conditions at high altitudes, such as temperature ch...
    more
  • Analysis and application of charge and discharge curve of lithium battery

    Analysis and application of charge and discharge curve of lithium battery

    Jun , 27 2024
    Abstract: In this paper, the analysis method of charge and discharge curve of lithium battery is introduced in detail, including charge efficiency, discharge characteristics, capacity evaluation, internal resistance evaluation and cycle life evaluation. Through the interpretation of the charge and discharge curve, the performance and characteristics of lithium batteries can be deeply understood, w...
    more
  • The characteristics and principle analysis of internal resistance of lithium battery

    The characteristics and principle analysis of internal resistance of lithium battery

    Jul , 12 2024
    The internal resistance of the battery is one of the most important characteristic parameters of the battery, which is an important parameter to characterize the battery life and the operating state of the battery, and an important symbol to measure the difficulty of the transmission of electrons and ions in the electrode. The internal resistance also reflects the health of the battery. The intern...
    more
  • Effect of electrolyte density and discharge on lead-acid batteries

    Effect of electrolyte density and discharge on lead-acid batteries

    Nov , 29 2024
    (1) Electrolyte density under different geographical and climatic strips. Whether the electrolyte density is high or low, it is necessary to make a specific analysis for the specific situation. Winter temperature is low, the viscosity of the electrolyte is large, it is not easy to penetrate the inside of the plate, the end voltage and capacity of the battery will decline, especially in the strong ...
    more
first page << 1 2 3 4 last page

a total of4 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
copyright © 2025 Shenzhen EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact