log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • How Lithium-ion Batteries Work

    How Lithium-ion Batteries Work

    Mar , 23 2023
    Lithium-ion batteries are popular because they have a number of important advantages over competing technologies: They're generally much lighter than other types of rechargeable batteries of the same size. The electrodes of a lithium-ion battery are made of lightweight lithium and carbon. Lithium is also a highly reactive element, meaning that a lot of energy can be stored in its at...
    more

  • What are the factors that are unfavorable to lead-acid batteries?

    What are the factors that are unfavorable to lead-acid batteries?

    Apr , 15 2023
    There are many factors that are unfavorable to the battery, mainly in the charging and discharging phase. (1). The "second super" discharge stage is mainly the discharge current overvalue, that is, the discharge exceeds the allowable current value for a long time; the second problem of discharge is over-discharge, that is, exceeding the allowable discharge capacity of the battery, which is called ...
    more

  • Three-stage charging of lead-acid battery

    Three-stage charging of lead-acid battery

    Apr , 15 2023
    1. What is the three-stage charging of lead-acid batteries? The charging method of lead-acid batteries should be divided into three stages, namely: constant current charging - constant voltage charging - trickle charging. Constant current charging stage: charge to 13.4V with 0.2C10 A current. Constant voltage charging stage: 2.4V/cell, charging time 3h, cut-off current 0.02C10A Trickle charge phas...
    more

  • What are the reasons for the sulfation of lead-acid battery plates?

    What are the reasons for the sulfation of lead-acid battery plates?

    Apr , 15 2023
    The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...
    more

  • Summary of the Design of Power Battery Management system

    Summary of the Design of Power Battery Management system

    Apr , 24 2023
    With the increasing number of electric vehicles, battery energy management system is becoming more and more important in addition to looking for batteries with high energy density and high safety. Different power batteries have different properties, and even if the same type of battery properties are inconsistent, in the process of use, there will be the possibility of accidents caused by expansio...
    more

  • Damage of lithium battery caused by overcharge and discharge

    Damage of lithium battery caused by overcharge and discharge

    Apr , 24 2023
    The cathode materials of lithium-ion batteries are usually composed of active compounds of lithium, while the negative electrodes are carbon with special molecular structure. The main components of the common cathode materials are licoo2/LiFePO4, etc. When charging, the potential added to the battery poles forces the positive compounds to release lithium ions and embed the anode molecules into the...
    more

  • Research on Safety problems and Solutions of Lithium Battery

    Research on Safety problems and Solutions of Lithium Battery

    Apr , 24 2023
    I. the danger of lithium-ion batteries. Lithium-ion battery is a potentially dangerous chemical power source because of its own chemical characteristics and system composition. (1) high chemical activity. Lithium is the main group element of the second cycle of the periodic table, which has extremely active chemical properties. (2) High energy density. The specific energy of lithium-ion battery is...
    more

  • Charge and discharge theory and calculation method design of lithium battery

    Charge and discharge theory and calculation method design of lithium battery

    May , 13 2023
    1 . Production of lithium Ion battery 1 .1 State Of Charge ( state-of-charge; S OC) Soc can be defined as the state of available electrical energy in the battery, usually expressed as a percentage. Because the available electric energy varies with charging and discharging current, temperature, and aging phenomenon, the definition Of the State of Charge is also divided into two types: Absolute stat...
    more

  • Introduction of industrial and commercial energy storage and analysis of income mode

    Introduction of industrial and commercial energy storage and analysis of income mode

    May , 15 2023
    Industrial and commercial energy storage system composition Industrial and commercial energy storage systems and energy storage power station systems include battery systems +BMS, PCS, EMS, transformers, racks, connecting cables, busbar cabinets, lightning protection, and grounding systems, monitoring and alarm systems, etc. Industrial and commercial energy storage systems are different from large...
    more

  • How to use UPS power supply to maximize its service life?

    How to use UPS power supply to maximize its service life?

    May , 16 2023
    The UPS power supply room should be a room with an empty and anti-static floor. The lightning protection effect should be good. It should be dustproof, moisture-proof and sunscreen. The input voltage should be within the planning. The most reasonable load planning is 30% - 60%. Full load and overload operation will affect the life of UPS. Maintain at least once a year. However, in practice, it is ...
    more

  • Negative electrode formula for high temperature performance of lead-acid battery

    Negative electrode formula for high temperature performance of lead-acid battery

    Jun , 07 2023
    Negative electrode formulation for high-temperature performance of lead-acid batteries (containing the first hydrogen evolution inhibitor Bi2O2CO3 and the second hydrogen evolution inhibitor ZnO). The basic formula of the negative electrode (number of weight) is: 100 parts lead powder, 8 ~ 11 parts dilute sulfuric acid, 9 ~ 13 parts deionized water, 0.06 ~ 0.14 parts short fiber, 0.10 ~ 0.20 parts...
    more

  • Preparation of reduced graphene oxide loaded lead oxide composites for lead carbon batteries

    Preparation of reduced graphene oxide loaded lead oxide composites for lead carbon batteries

    Jun , 07 2023
    Graphene is a new type of two-dimensional structure conductive material, which is composed of a single layer of carbon atoms and its basic structural unit is a six-membered ring structure, which has good chemical stability. Moreover, graphene has a high specific surface area, which not only provides a large reaction interface, but also improves the dispersion of surface nanomaterials. The high con...
    more
first page << 1 ... 15 16 17 18 19 ... 25 >> last page

a total of25 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact