China Industrial and commercial energy storage system,Competitive Price Industrial and commercial energy storage system

Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

Apr , 20 2024

What impact will the lithium battery have after being put aside for a long time? When the lithium battery is idle, due to the nature of the battery itself, self-discharge, passivation of positive and negative electrode materials, electrolyte decomposition and other phenomena will occur. The instability of the negative SEI will lead to the rapid decline of the negative active substance, which is ea...

more

Uninterruptible Power Supply UPS System for Computers Protection

Apr , 26 2024

What is A UPS System? An Uninterruptible Power Supply (UPS) system is an electrical device that provides emergency power to a computer or other electronic equipment in the event of a power outage or electrical disturbance. It acts as a backup power source, allowing the connected devices to continue functioning for a certain period or providing sufficient time for a safe shutdown. How UPS System fo...

more

The difference between energy storage converter and grid-connected inverter

Apr , 26 2024

Energy Storage Converter Energy storage converters (PCS), also known as "bi-directional energy storage inverters", are the core components of the two-way flow of electricity between the energy storage system and the grid, and are used to control the charging and discharging processes of the battery, and to perform the conversion of AC and DC currents. In the absence of grid, it can directly supply...

more

Causes, effects and measures of common problems of photovoltaic modules

Apr , 26 2024

First. Excessively high/low temperature Excessively high or low PV module temperatures can negatively affect the performance of the PV power system. The following are the causes and effects as well as the corresponding measures: 1. Causes of excessive temperature: solar radiation, heat conduction, shadow coverage, etc. Impact: Reduces the conversion efficiency of the module. Excessive temperature ...

more

Measures to suppress harmonics

May , 11 2024

The fundamental cause of harmonic generation is due to nonlinear loads. When the current flows through the load and does not have a linear relationship with the applied voltage, it forms a non sinusoidal current, resulting in harmonics. The suppression of harmonics in the power system is to reduce or eliminate the harmonic current injected into the system, in order to control the harmonic voltage ...

more

The difference and comparison of advantages between P-type and N-type components

May , 11 2024

Materials and Structure of a Solar Cell The construction of a particular solar cell is going to vary slightly depending on the specific technology that is utilized to manufacture it. In most solar cells, there is an aluminum back surface field and a P-N Junction. At the P-N junction, there are p-type crystalline silicon wafers that are positively charged and n-type crystalline silicon wafers that ...

more

Differences in communication serial ports

May , 16 2024

RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...

more

What are the characteristics of industrial UPS power supplies

Jun , 14 2024

Industrial UPS power supply needs to focus on the design of the ability to operate in high-temperature environments. Component design must be adapted to the operating requirements of industrial environments, high temperature and high humidity, but also to cope with corrosive gases on the corrosion of the system. Operating continuously at full load under a variety of operating conditions, industria...

more

Air cooling and heat dissipation design of industrial and commercial energy storage system

Jun , 14 2024

1 Air cooling and heat dissipation design of industrial and commercial energy storage system Air cooling is the use of air as a heat exchange medium, the use of air to circulate in the battery pack, the use of the temperature difference between the battery module and the air for heat transfer, generally divided into passive air cooling and active air cooling. The main factors affecting its cooling...

more

Industrial and commercial energy storage system liquid cooling design

Jun , 14 2024

1. Industrial and commercial energy storage system liquid cooling design For the high-rate charging and discharging process of large-scale battery packs, the cooling capacity of air cooling system can not meet the heat dissipation demand of battery packs. Liquid has a higher specific heat capacity and higher thermal conductivity than air, and the liquid cooling cooling speed is faster, which has a...

more

What is the meaning of float charging for intelligent three‐stage charger in battery charger?

Jul , 12 2024

Float charging: Keep constant voltage charging, the charging current continues to decrease, and the battery is charged with maintenance type. When the charging current decreases to the set value or the charging time reaches the set value, the red light of sufficiency will be on, and the time will be about 2H, charging 10% of the power. Ordinary chargers are old‐fashioned chargers, charging, whethe...

more

Effect of electrolyte density and discharge on lead-acid batteries

Nov , 29 2024

(1) Electrolyte density under different geographical and climatic strips. Whether the electrolyte density is high or low, it is necessary to make a specific analysis for the specific situation. Winter temperature is low, the viscosity of the electrolyte is large, it is not easy to penetrate the inside of the plate, the end voltage and capacity of the battery will decline, especially in the strong ...

more

blog

blog