log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Single-Phase vs. 3-Phase Power Protection: What You Need to Know（part-2）

    Single-Phase vs. 3-Phase Power Protection: What You Need to Know（part-2）

    Aug , 29 2022
    What is 3-Phase Power? Unlike single-phase, 3-phase power produces three separate wave currents so there is no temporary absence of power. 3-Phase power delivers power at a steady, constant rate and can reach higher voltage levels up to 480V in the USA. This steady stream of power and ability to handle higher loads makes a 3-phase supply ideal for industrial and commercial operations. More Waves. ...
    more

  • Classification of inverters based on wave type (Pure Sine wave)

    Classification of inverters based on wave type (Pure Sine wave)

    Aug , 29 2022
    Power inverters can be mainly divided into pure sine wave inverters and modified sine wave inverters according to their waveforms. In fact, there is another type - square wave inverter, the earliest inverter, which is rarely seen now. Pure sine wave inverter The pure sine wave inverter outputs true sine wave alternating current without electromagnetic pollution, which is the same or even better th...
    more

  • Fourier Analysis of input current of Single phase controlled bridge rectifier

    Fourier Analysis of input current of Single phase controlled bridge rectifier

    Aug , 29 2022
    While the use of uncontrolled rectifier circuits remains prominent, for some applications, more control and efficiency is necessary. This can be accomplished through the use of a controlled rectifier circuit in which thyristors connected in a full-bridge configuration adjust the average voltage. Each thyristor has a gate that controls when it turns on. With control circuitry these devices can be o...
    more

  • SEI film formation mechanism

    SEI film formation mechanism

    Sep , 05 2022
    During the formation of the SEI film, various reduction reactions are carried out by the electrolyte solvent, lithium salt, additives, and trace air impurities. This series of reactions is not only affected by the inherent properties of substances such as reduction potential, reduction activation energy, and exchange current density, but also by other factors such as temperature, electrolyte salt ...
    more

  • Effect of electrolyte on SEI film

    Effect of electrolyte on SEI film

    Sep , 05 2022
    The electrolyte is the main source of the reduction reaction reactants for the formation of the SEI film , and both the electrolyte solvent and the lithium salt will affect the composition of the SEI film. When the main components of the electrolyte are basically fixed, the performance of the SEI membrane can only be improved by other means. The researchers found that the formation of the SEI film...
    more

  • Influence of SEI film on the performance of Li-ion battery

    Influence of SEI film on the performance of Li-ion battery

    Sep , 05 2022
    After extensive research, it has been found that the properties of SEI films greatly affect the performance of Li-ion batteries. During the formation process, the amount of the SEI film formed represents the amount of lithium in the consumed lithium-ion battery, which directly determines the capacity of the lithium- ion battery. Therefore, in the process of forming the SEI film, the less lithium i...
    more

  • Overview of the lithium battery formation process

    Overview of the lithium battery formation process

    Sep , 05 2022
    Lithium- ion battery formation process includes constant current, constant voltage and intelligent charging. The polarization phenomenon of constant current charging is serious, and its initial current is low, the current at the end of charging is high, the charging time is long, the energy waste is serious, and the battery life will be reduced. During constant voltage charging, the current is rel...
    more

  • Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

    Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

    Sep , 05 2022
    1. Energy density: The energy density of ternary lithium is about 1.7 times that of lithium iron phosphate, so the volume and weight of ternary lithium batteries will be smaller than those of lithium iron phosphate batteries, and the car load will be smaller. 2. Safety performance: lithium iron phosphate battery will perform better in acupuncture test, and in high temperature environment, the stab...
    more

  • Effect of formation current density on battery performance

    Effect of formation current density on battery performance

    Sep , 13 2022
    When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...
    more

  • Failure causes of lithium battery- Failure in the production process

    Failure causes of lithium battery- Failure in the production process

    Oct , 08 2022
    In the production process, personnel, equipment, raw materials, methods, and the environment are the main factors that affect product quality, and the production process of LiFePO4 power batteries is no exception. Personnel and equipment belong to the category of management, so we mainly discuss the last three influences factor. Failure of batteries caused by impurities in electrode active materia...
    more

  • Failure causes of lithium battery- Failure during shelving

    Failure causes of lithium battery- Failure during shelving

    Oct , 08 2022
    In the service life of the power battery, most of the time is in a state of shelving. Generally, after a long period of shelving, the performance of the battery will decline, generally showing an increase in internal resistance, a decrease in voltage, and a decrease in discharge capacity. There are many factors that cause the degradation of battery performance, among which temperature, state of ch...
    more

  • Failure causes of lithium battery- Failure during recycling

    Failure causes of lithium battery- Failure during recycling

    Oct , 08 2022
    The battery is generally exothermic during use, so the effect of temperature is very important. In addition, road conditions, usage, ambient temperature, etc. will have different effects. The capacity loss of LiFePO4 power batteries during cycling is generally considered to be caused by the loss of active lithium ions. The research shows that the aging of LiFePO4 power battery during cycling is ma...
    more
first page << 1 ... 16 17 18 19 20 ... 30 >> last page

a total of30 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact