sei formation mechanism

SEI film formation mechanism

Sep , 05 2022

During the formation of the SEI film, various reduction reactions are carried out by the electrolyte solvent, lithium salt, additives, and trace air impurities. This series of reactions is not only affected by the inherent properties of substances such as reduction potential, reduction activation energy, and exchange current density, but also by other factors such as temperature, electrolyte salt ...

more

Effect of electrolyte on SEI film

Sep , 05 2022

The electrolyte is the main source of the reduction reaction reactants for the formation of the SEI film , and both the electrolyte solvent and the lithium salt will affect the composition of the SEI film. When the main components of the electrolyte are basically fixed, the performance of the SEI membrane can only be improved by other means. The researchers found that the formation of the SEI film...

more

Influence of SEI film on the performance of Li-ion battery

Sep , 05 2022

After extensive research, it has been found that the properties of SEI films greatly affect the performance of Li-ion batteries. During the formation process, the amount of the SEI film formed represents the amount of lithium in the consumed lithium-ion battery, which directly determines the capacity of the lithium- ion battery. Therefore, in the process of forming the SEI film, the less lithium i...

more

Overview of the lithium battery formation process

Sep , 05 2022

Lithium- ion battery formation process includes constant current, constant voltage and intelligent charging. The polarization phenomenon of constant current charging is serious, and its initial current is low, the current at the end of charging is high, the charging time is long, the energy waste is serious, and the battery life will be reduced. During constant voltage charging, the current is rel...

more

Effect of formation current density on battery performance

Sep , 13 2022

When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...

more

Overview of Si-based anode materials

Oct , 17 2022

The theoretical specific capacity of Si is as high as 4200mAh/g, which is 10 times higher than the theoretical specific capacity of graphite; the lithium intercalation potential of Si is low, which is 0.37mV Li/Li+; and Si is the second most abundant element on the earth, which is not harmful to the environment. Destruction will occur, and the production process of nano-silicon is mature and low-c...

more

How Low Frequency UPS Safeguards Critical Information

May , 11 2024

What is a Low Frequency UPS? A Low Frequency Online UPS is a sophisticated power protection device that utilizes double conversion technology to provide continuous and clean power to connected equipment. Unlike traditional Offline UPS, where the load is directly powered by the mains until a power failure occurs, it continuously powers the load through an inverter, ensuring a seamless transition be...

more