China Industrial UPS power supply,Competitive Price Industrial UPS power supply

What are the characteristics of industrial UPS power supplies

Jun , 14 2024

Industrial UPS power supply needs to focus on the design of the ability to operate in high-temperature environments. Component design must be adapted to the operating requirements of industrial environments, high temperature and high humidity, but also to cope with corrosive gases on the corrosion of the system. Operating continuously at full load under a variety of operating conditions, industria...

more

A brief introduction to EMI

Jun , 14 2024

What is an active power filter Active Power Filter (APF) is a new type of power electronic device used to dynamically suppress harmonics and compensate reactive power, which can compensate for harmonics and reactive power changes in magnitude and frequency. The reason why the active filter is called active, as the name suggests, the device needs to provide a power supply (to compensate for the har...

more

Industrial and commercial energy storage system liquid cooling design

Jun , 14 2024

1. Industrial and commercial energy storage system liquid cooling design For the high-rate charging and discharging process of large-scale battery packs, the cooling capacity of air cooling system can not meet the heat dissipation demand of battery packs. Liquid has a higher specific heat capacity and higher thermal conductivity than air, and the liquid cooling cooling speed is faster, which has a...

more

The difference between the first, second, and third levels of distribution boxes

Jun , 22 2024

What do the primary, secondary, and tertiary boxes of a distribution box mean? This is a relative issue. Let's make a hypothesis: a newly built residential area introduces a 10kV incoming line and builds a distribution room. The outgoing line from the low-voltage end of the transformer is 0.4kV to the distribution cabinet (primary distribution cabinet), then the outgoing line is led to the distrib...

more

Maximum power point tracking algorithm for photovoltaic power generation

Jun , 22 2024

1. Introduction Photovoltaic power generation is a technology that uses solar energy to convert light energy into electricity. In the photovoltaic power generation system, in order to obtain the maximum power generation power, it is necessary to track the change of solar radiation intensity in real time, and adjust the working state of the photovoltaic module to keep near the maximum power point. ...

more

Five things that shorten the life of your UPS battery

Jun , 26 2024

One of the more common questions we get asked is how long a UPS battery will last. The ballpark, general answer is 3 to 5 years; however that answer is generallyl. And that’s because the life of your battery depends on a whole host of factors. Those factors are what we’re going to discuss today. Here are some of the things that can shorten the lifespan of your UPS battery. Let’s jump right in. Amb...

more

What are the components of a modular UPS and the STS switching switch

Jun , 26 2024

What are the components of a modular UPS? The exact components may vary slightly depending on the specific model and manufacturer, but the following are common components in UPS systems: Power module The power module is the building block of modular UPS. Each power module typically includes components such as rectifiers, inverters, and DC-DC converters. These modules are ho...

more