log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • How to do the SOC-OCV test for Lithium batteries?

    How to do the SOC-OCV test for Lithium batteries?

    Apr , 06 2022
    OCV is very important for SOC estimation. It is a function of cell SOC and temperature. There are two methods to measure the OCV, namely coulomb titration and voltage relaxation. The former discharges and charges the cell with the same low current while measuring the terminal voltage. The OCV is defined as the average value of the charge and the discharge terminal voltage. The latter determines th...
    more

  • Some FAQ about the Lithium batteries for UPS

    Some FAQ about the Lithium batteries for UPS

    Apr , 06 2022
    What are the primary benefits of switching to lithium based UPS batteries? The most common reason cited is the significantly longer service life. Lithium also provides a greater cycle life (the number of charge/discharge cycles ranges from extends into the thousands, versus approximately 500-600 for VRLA batteries), as well as a longer warranty. Furthermore, the lighter weight and smaller footprin...
    more

  • Battery charger options (part-5)

    Battery charger options (part-5)

    May , 23 2022
    In this series of articles we will discuss the options you can have in your battery charger. You can check out these options for choosing your desired battery charger solution. Zero Center Ammeter with Battery and Load Terminals DC Ammeter, which reads both charge and discharge current to the battery. Two sets of output terminals are provided, one for the load connection and one for the battery co...
    more

  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-1)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-1)

    Jul , 04 2022
    Temperature is very important for lithium- ion batteries. Low temperature will reduce the electrical performance of lithium- ion batteries (capacity, rate performance), but it can improve the storage life of lithium- ion batteries. High temperature can improve electrical performance (capacity, rate performance), but It will reduce the stability of the electrode/electrolyte interface and cause a ra...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-2)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-2)

    Jul , 04 2022
    In order to ensure the consistency of the ambient temperature, an incubator is used for precise temperature control, the battery charging and discharging equipment adopts the DigatronBTS-600 equipment, and the Agilent 34970A equipment is used to collect the temperature information of the battery. When the above-mentioned battery is at an ambient temperature of 27°C, the temperature change curve of...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-3)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-3)

    Jul , 04 2022
    1.       Influence of ambient temperature: The following figure shows the battery temperature rise curve (average temperature of 5 sampling points) during 1C charge and discharge process of 55Ah battery at ambient temperatures of 20°C, 27°C and 40°C. From the figure, we can It can be seen that the charging time of the battery at 20°C is 74min and the discharge time is...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 3. Influence of charge and discharge rate The charge and discharge rate characterizes the charge and discharge current of the lithium- ion battery. Therefore, the charge and discharge rate must have a very significant impact on the heat generation power of the lithium-ion battery. , the final temperature and t...
    more

  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 4. The temperature rise and temperature difference of the battery pack under different working conditions On the basis of the above-mentioned single cell heat generation model, the battery pack model was established by using SOLIDWORKS software to simulate the heat production and the battery pack under differe...
    more

  • Air Transport Requirements for Lithium Ion Batteries

    Air Transport Requirements for Lithium Ion Batteries

    Jul , 11 2022
    Speaking of UN38.3, I believe it will be familiar to those engaged in the lithium battery industry. UN38.3 refers to Section 38.3 of the United Nations Manual of Tests and Criteria for the Transport of Dangerous Goods specially formulated by the United Nations for the transportation of dangerous goods, referred to as UN38.3. , high and low temperature cycle, vibration test, impact test, 55 ℃ exter...
    more

  • Theoretical introduction to Switch mode converters

    Theoretical introduction to Switch mode converters

    Jul , 18 2022
    Switch mode power conversion technology dominates nearly every segment of the economy, including demanding aerospace and military power systems that impose requirements more demanding than those imposed by power utilities or industry. Switch mode converters are, for example, successfully hardened against the effects of frequent lightning strikes on aircraft, against the effects of nuclear electrom...
    more

  • Theoretical introduction to an AC power system

    Theoretical introduction to an AC power system

    Jul , 22 2022
    AC Power Systems have plenty more units, terms, measurements, interesting waveforms and math to describe their behavior. Any formulas presented here are for reference and validation only. The intension of this paperis convey the concept without having to seriously crunch numbers. All the terms and formulas interweave so itis difficult to create a flow of one topic to another without skipping aroun...
    more
first page << 1 ... 5 6 7 8 9 ... 14 >> last page

a total of14 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact