thermal runaway of batteries

Introduction of industrial and commercial energy storage and analysis of income mode

May , 15 2023

Industrial and commercial energy storage system composition Industrial and commercial energy storage systems and energy storage power station systems include battery systems +BMS, PCS, EMS, transformers, racks, connecting cables, busbar cabinets, lightning protection, and grounding systems, monitoring and alarm systems, etc. Industrial and commercial energy storage systems are different from large...

more

The UPS technical glossary

May , 23 2023

This ups technical glossary is designed to help you to understand the technical terms used within the uninterruptible power supply (UPS) industry. A AC ripple Is the residual periodic variation of the DC voltage withina UPS which has been derived from an unwelcome alternating (AC) source. An AC ripple causes internal heating and deterioration of the UPS battery poles and so should be prevented fom...

more

Negative electrode formula for high temperature performance of lead-acid battery

Jun , 07 2023

Negative electrode formulation for high-temperature performance of lead-acid batteries (containing the first hydrogen evolution inhibitor Bi2O2CO3 and the second hydrogen evolution inhibitor ZnO). The basic formula of the negative electrode (number of weight) is: 100 parts lead powder, 8 ~ 11 parts dilute sulfuric acid, 9 ~ 13 parts deionized water, 0.06 ~ 0.14 parts short fiber, 0.10 ~ 0.20 parts...

more

Preparation of reduced graphene oxide loaded lead oxide composites for lead carbon batteries

Jun , 07 2023

Graphene is a new type of two-dimensional structure conductive material, which is composed of a single layer of carbon atoms and its basic structural unit is a six-membered ring structure, which has good chemical stability. Moreover, graphene has a high specific surface area, which not only provides a large reaction interface, but also improves the dispersion of surface nanomaterials. The high con...

more

Why Choose a Lithium-Ion UPS Battery?

Jun , 21 2023

Although lithium-ion UPS systems have been around for decades, most people have been hesitant to choose this option because they were more expensive. With the onset of advanced battery technology, lithium-ion UPS systems have become much more attractive due to reduced pricing that rivals most standard, lead-acid battery UPS systems. UPS systems feature a state-of-the-art lithium iron phosphate (Li...

more

Basic knowledge of filters

Jun , 21 2023

The Line filter is a filter circuit composed of capacitance, inductance and resistance. A filter can effectively filter out a specific frequency point in the power line or frequencies outside of that frequency point, obtaining a specific frequency power signal or eliminating a specific frequency power signal. A filter, as the name suggests, is a device that filters waves. Wave "is a very broad phy...

more

Lithium battery capacity loss cause analysis

Jun , 21 2023

Lithium-ion batteries are the fastest-developing secondary batteries after cadmium-nickel and nickel-hydrogen batteries. Its high-energy properties make its future look bright. However, lithium-ion batteries are not perfect, and their biggest problem is the stability of their charge-discharge cycle. This paper summarizes and analyzes the possible causes of capacity attenuation of Li-ion batteries,...

more

Selection of lead carbon-carbon addition

Jun , 30 2023

The influence of chemical properties such as carbon material type and addition amount on battery performance was studied. Several different types of carbon materials (graphite, carbon black, activated carbon, etc.) were selected and tested for their effects on the negative electrode plate with additional amounts ranging from 0.2% to 4%, as well as hydrogen evolution inhibitors and adhesives. And c...

more

Effect of carbon black content on negative electrode performance of lead-acid battery

Aug , 04 2023

VRLA battery is not ideal in electric vehicles because of its short life under deep charge and discharge cycle conditions. In recent years, with the improvement of positive plate grid materials, the cycle life of batteries has been improved, and the main reason for the failure of VRLA batteries for electric vehicles is the sulfation of the negative electrode. To this end, there are more studies on...

more

Why choose gel batteries?

Aug , 22 2023

The colloidal lead-acid battery is an improvement of the ordinary lead-acid battery with liquid electrolyte. The sulfuric acid electrolyte is replaced by a colloidal electrolyte, and the safety, power storage, discharge performance, and service life are improved compared with the ordinary battery. The colloidal lead-acid battery adopts a gel-like electrolyte; no free liquid is inside. Under the sa...

more

Important performance of the battery

Sep , 04 2023

1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...

more

Why only online UPS topology provides mission critical load protection

Sep , 09 2023

Why does only online UPS topology provides mission critical load protection? Modern, static UPS systems are broadly classified into three design architectures: on-line, off-line and line interactive. This post describes and compares the three types and explains why – for truly critical loads – online ups topology is the only acceptable approach. Facility executives today face increased demands for...

more