ups back up battery

Advantages and disadvantages of constant voltage and current power supply

Jul , 06 2024

The advantages of constant voltage and current power supply include flexibility, stability, protection function, adjustability, and high efficiency, while the disadvantages mainly include high cost, large volume, thermal management requirements, and response time. 1. Advantages: a. Flexibility: A constant voltage and current power supply can provide stable current or voltage output as needed, suit...

more

Explanation of terms related to UPS power supply

Jul , 06 2024

Transient Recovery Time: The time it takes for the output voltage to return to the specified range when there is a sudden change in load (0‐100%, 100%‐0), usually on the order of seconds (ms). Filter: a device used to eliminate noise, the input or output filtered to obtain a pure contention of the alternating current. Shielding: The use of physical principles, used to isolate the electromagnetic r...

more

What is the meaning of float charging for intelligent three‐stage charger in battery charger?

Jul , 12 2024

Float charging: Keep constant voltage charging, the charging current continues to decrease, and the battery is charged with maintenance type. When the charging current decreases to the set value or the charging time reaches the set value, the red light of sufficiency will be on, and the time will be about 2H, charging 10% of the power. Ordinary chargers are old‐fashioned chargers, charging, whethe...

more

The characteristics and principle analysis of internal resistance of lithium battery

Jul , 12 2024

The internal resistance of the battery is one of the most important characteristic parameters of the battery, which is an important parameter to characterize the battery life and the operating state of the battery, and an important symbol to measure the difficulty of the transmission of electrons and ions in the electrode. The internal resistance also reflects the health of the battery. The intern...

more

Overvoltage protection and undervoltage protection principle of lithium battery

Jul , 12 2024

1, lithium battery protection board composition The general lithium battery protection board is composed of a control IC, a MOS tube, a resistance capacitor, and a FUSE, as shown in the following figure 1, overcharge protection principle When the battery is charged, the current (direction shown by the arrow) flows into the positive electrode of the battery pack and flows out of the negative electr...

more

How to extend the power supply time of uninterruptible power supply (UPS)

Aug , 03 2024

There are two ways to extend the duration of an uninterruptible power supply： 1. Increase battery capacity. According to the length of time required to increase the number of batteries, but this method will cause a relative increase in battery charging time, but also increase the number of corresponding maintenance equipment, increase product size, resulting in an increase in the overall cost of U...

more

Is the uninterrupted host suitable for computers to reduce hard shutdowns

Aug , 17 2024

The best offline intelligent UPS 3000va 1800w backup battery for desktop computers provides complete power protection to protect connected devices from surges, overvoltage, and undervoltage damage. Is the uninterrupted host suitable for computers? Advanced microprocessor control technology enables UPS to maintain high performance and reliability, effectively operating to reduce en...

more

Four operating modes of UPS

Aug , 23 2024

1、Normal operation mode The principle of the power supply system is that when the utility power is normal, the machine will convert the alternating current of the utility power to direct current, and then charge the battery for use when the power is interrupted; it is emphasized here that the power supply system will not only act when the power is out, such as when the voltage is too low or high, ...

more

Influence of electrolyte on battery performance

Nov , 29 2024

(1) The relationship between the electrolyte concentration and the electromotive force and open circuit voltage of the lead-acid battery. The electromotive force and open circuit voltage of the lead-acid battery are related to the concentration of the electrolyte of the lead-acid battery than H2O4, and the electromotive force and open circuit voltage of the lead-acid battery also decrease with the...

more

Measurement method and procedure of internal resistance of lead-acid battery

Dec , 07 2024

1.Procedure for Battery Resistance Tests Use the following test procedure or use the capacity test procedure described in IEEE std. 1188. Step 1. Make sure all battery connections are clean, tight and free of corrosion. Pay attention to the insulation of tools to avoid short-circuiting of batteries. Step 2. Equalizing charge the batteries for 12hrs; Constant voltage & limited maximum current c...

more

Lithium battery life The reason for the slow charging speed

Dec , 13 2024

1. Electrical problems: Insufficient power of the charger is one of the common reasons for slow charging speed. If the output current of the charger used is small and cannot meet the maximum charging current requirements of the battery, the charging speed will be limited. For example, a lithium battery mobile phone that supports fast charging, the original charger output current is 3A, and the cha...

more

Causes and methods of lithium battery life decline

Dec , 13 2024

1. Battery aging: After multiple charge and discharge cycles, the chemical substances inside the lithium battery will gradually undergo irreversible changes. For example, the structure of the electrode material may be damaged when lithium ions are embedded and deembedded between the positive and negative electrodes. Taking the common lithium cobalt oxide cathode material as an example, with the in...

more

blog

blog