Blog
  • How to calculate the required ups load capacity?

    How to calculate the required ups load capacity?

    Oct , 19 2023
    Measured in “watts”, UPS load capacity is an important factor to consider when choosing a UPS (uninterruptible power supply). It determines how many electronic devices the UPS system can support. This post will tell you how to choose the right UPS with required UPS load capacity in the following four steps. Clarify UPS Measurement Units UPS systems are rated either in kilowatts (kW) or in kilo-vol...
    more
  • Inverter energy storage system on the role

    Inverter energy storage system on the role

    Oct , 27 2023
    First, the basic principle of inverter Inverter is a device that converts direct current to alternating current, its main principle is to use the switching characteristics of semiconductor devices (such as field effect tubes or thyristors, etc.) to control the power supply voltage and current through rapid switching, so as to achieve the conversion of direct current to the corresponding frequency ...
    more
  • UPS power supply power supply method and daily use precautions

    UPS power supply power supply method and daily use precautions

    Oct , 28 2023
    Today, whether it is a computer room or a data center, UPS power supply has played a vital position. When the UPS power supply is power supply in the municipal power, it is the role of the voltage regulator and filter to ensure the normal operation of the equipment; when the municipal power is interrupted, it can provide it by providing its DC power supply part (battery pack, diesel generator, etc...
    more
  • What are the characteristics of industrial UPS power supply

    What are the characteristics of industrial UPS power supply

    Oct , 28 2023
    Industrial UPS power supplies need to focus on the ability to operate in high-temperature environments. The design of components must adapt to the operational requirements of the industrial environment, adapt to high temperature and humidity, and also be able to cope with the corrosion of corrosive gases on the system. Under various operating conditions and continuous full load operation, industri...
    more
  • What is single phase ups?

    What is single phase ups?

    Nov , 17 2023
    Single phase UPS has a single input and output source to the electrical equipment. With just one sinewave voltage, it only requires two wires to complete the circuit, one conductor and one neutral. Single phase UPS uninterruptible power supplies typically cover requirements up to 30 kVA. They are for servers, telecoms or computer systems, and network switches. Also they are along with any device t...
    more
  • What is the ups power factor?

    What is the ups power factor?

    Nov , 17 2023
    Power factor (pf) is the difference between actual energy consumed and the apparent powerin an AC circuit. It will calculate as a decimal or percentage between 0-1 pf and 0-100% i.e. 0.9 pF = 90%. UPS input power factor The UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of power supply, but also a load on the utility power source. It means the ...
    more
  • EMC classification and selection of UPS, using shielded cables

    EMC classification and selection of UPS, using shielded cables

    Nov , 25 2023
    Introduction to UPS and EMC Uninterruptible power supply (UPS), as a constant frequency, stable voltage, pure, and uninterrupted high-quality power supply, is widely used in various places with high requirements for power quality and continuity, such as personal, commercial, light industry, and industrial areas. When selecting UPS for various scenarios mentioned above, the core focus is mainly on ...
    more
  • What is the difference between UPS linear load and non linear load?

    What is the difference between UPS linear load and non linear load?

    Nov , 29 2023
    AC electrical loads are referred to either as linear or non linear load depending on how they draw current from the mains power supply waveform. Linear Load UPS loads where the voltage and current waveforms are sinusoidal. The current at any time is proportional to voltage. Linear load is: POWER FACTOR IMPROVEMENT CAPACITORS, INDESCENT LAMPS, HEATERS ETC Non Linear Load Applies to those UPS loads ...
    more
  • UPS power supply how to choose lithium battery and lead-acid battery?

    UPS power supply how to choose lithium battery and lead-acid battery?

    Dec , 08 2023
    UPS power supply is an indispensable and important part of modern power guarantee system. In the UPS power supply, the commonly used battery types include lithium iron phosphate batteries and lead-acid batteries, then lithium batteries and lead-acid battery UPS power supply which is good, consumers how to choose? This article will explain to you. UPS power supply choose lithium battery and lead-ac...
    more
  • The main application of lithium battery UPS

    The main application of lithium battery UPS

    Dec , 08 2023
    In the current UPS power supply field, lithium battery UPS has become a new way, is widely used in various fields, the use of lithium batteries as UPS energy storage device can improve the performance of UPS. Because the volume and weight of lead-acid batteries are very large and relatively bulky, UPS lithium batteries will be a trend in the future. 1. Industrial equipment When the industrial equi...
    more
  • Introduction to rack mounted uninterruptible power supply, application scenarios, etc

    Introduction to rack mounted uninterruptible power supply, application scenarios, etc

    Dec , 09 2023
    Rack mounted UPS power supply is a type of power protection device. It is mainly used in data centers, server rooms, communication rooms, banks, hospitals, and other places that require high power reliability. The uninterrupted power supply of UPS can avoid unexpected power outages, voltage fluctuations, and other issues, ensuring the stable operation of equipment. The requirements for UPS power s...
    more
  • How is ups efficiency calculated?

    How is ups efficiency calculated?

    Dec , 09 2023
    UPS efficiency is a big deal. The more efficient your UPS, the cheaper it is to run. As energy costs continue to increase, we’ve seen that businesses and organisations across multiple sectors are now looking for ways to increase their energy efficiency and subsequently reduce their energy bills. One of the ways to do this is by investing in an efficient uninterruptible power supply (UPS). What is ...
    more
first page << 1 ... 6 7 8 9 10 11 >> last page

a total of11 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact