log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Power Factor and Harmonic Analysis in PWM converter

    Power Factor and Harmonic Analysis in PWM converter

    Aug , 15 2022
    Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part of most of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC to DC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is use...
    more

  • Battery charging technology over view- SCR chargers

    Battery charging technology over view- SCR chargers

    Aug , 22 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy must be replenished from the electric network. The quality of the charging process is critical tothe health and longevity of batteries. As a result, battery chargers play a key role in the life and performance of today’s industrial batteries. A battery charger is an electrical/electronic device that conv...
    more

  • How a Voltage Regulator Works

    How a Voltage Regulator Works

    Aug , 22 2022
    All voltage regulators utilize the same technology to stabilize the output voltage. The output voltage is sampled (Sampled) through a resistor divider (Resistive Divider) connected to the inverting input terminal (Inverting Input) of the error amplifier (Error Amplifier), and the non-inverting input terminal (Non-inverting Input) of the error amplifier is connected to a reference voltage Vref. The...
    more

  • What are the installation steps for the voltage stabilizer?

    What are the installation steps for the voltage stabilizer?

    Aug , 22 2022
    The voltage stabilizer is composed of voltage stabilizer and constant voltage, control circuit, and servo motor. When the input voltage or load changes, the control circuit performs sampling, comparison and amplification, and then drives the servo motor to rotate, so that the position of the carbon brush of the voltage regulator changes, and the coil turns ratio is automatically adjusted to mainta...
    more

  • Classification of inverters based on wave type (Pure Sine wave)

    Classification of inverters based on wave type (Pure Sine wave)

    Aug , 29 2022
    Power inverters can be mainly divided into pure sine wave inverters and modified sine wave inverters according to their waveforms. In fact, there is another type - square wave inverter, the earliest inverter, which is rarely seen now. Pure sine wave inverter The pure sine wave inverter outputs true sine wave alternating current without electromagnetic pollution, which is the same or even better th...
    more

  • Fourier Analysis of input current of Single phase controlled bridge rectifier

    Fourier Analysis of input current of Single phase controlled bridge rectifier

    Aug , 29 2022
    While the use of uncontrolled rectifier circuits remains prominent, for some applications, more control and efficiency is necessary. This can be accomplished through the use of a controlled rectifier circuit in which thyristors connected in a full-bridge configuration adjust the average voltage. Each thyristor has a gate that controls when it turns on. With control circuitry these devices can be o...
    more

  • SEI film formation mechanism

    SEI film formation mechanism

    Sep , 05 2022
    During the formation of the SEI film, various reduction reactions are carried out by the electrolyte solvent, lithium salt, additives, and trace air impurities. This series of reactions is not only affected by the inherent properties of substances such as reduction potential, reduction activation energy, and exchange current density, but also by other factors such as temperature, electrolyte salt ...
    more

  • Overview of the lithium battery formation process

    Overview of the lithium battery formation process

    Sep , 05 2022
    Lithium- ion battery formation process includes constant current, constant voltage and intelligent charging. The polarization phenomenon of constant current charging is serious, and its initial current is low, the current at the end of charging is high, the charging time is long, the energy waste is serious, and the battery life will be reduced. During constant voltage charging, the current is rel...
    more

  • Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

    Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

    Sep , 05 2022
    1. Energy density: The energy density of ternary lithium is about 1.7 times that of lithium iron phosphate, so the volume and weight of ternary lithium batteries will be smaller than those of lithium iron phosphate batteries, and the car load will be smaller. 2. Safety performance: lithium iron phosphate battery will perform better in acupuncture test, and in high temperature environment, the stab...
    more

  • Effect of formation current density on battery performance

    Effect of formation current density on battery performance

    Sep , 13 2022
    When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...
    more

  • Why is industrial equipment equipped with voltage regulators

    Why is industrial equipment equipped with voltage regulators

    Sep , 26 2022
    The stable and reliable operation of industrial equipment requires a stable energy supply, that is, high-quality power supply. The current power quality is seriously affected and deteriorating, which has a great impact on the safe use of industrial equipment. [Power supply mainly has the following effects] a. Overvoltage: It will cause the overvoltage alarm of the CNC system, accelerate the aging ...
    more

  • What are the procedures for the correct use of a voltage regulator?

    What are the procedures for the correct use of a voltage regulator?

    Sep , 26 2022
    The voltage stabilizer can be widely used in: electronic computers, precision machine tools, computed tomography (CT), precision instruments, test devices, Elevator lighting, imported equipment and production lines and other places that require stable voltage of the power supply. So what are the procedures for using the voltage regulator correctly? Turn on the power switch of the voltage stabilize...
    more
first page << 1 2 3 4 >> last page

a total of4 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact