advantages of nickel cadmium batteries

Selection of lead carbon-carbon addition

Jun , 30 2023

The influence of chemical properties such as carbon material type and addition amount on battery performance was studied. Several different types of carbon materials (graphite, carbon black, activated carbon, etc.) were selected and tested for their effects on the negative electrode plate with additional amounts ranging from 0.2% to 4%, as well as hydrogen evolution inhibitors and adhesives. And c...

more

Effect of carbon black content on negative electrode performance of lead-acid battery

Aug , 04 2023

VRLA battery is not ideal in electric vehicles because of its short life under deep charge and discharge cycle conditions. In recent years, with the improvement of positive plate grid materials, the cycle life of batteries has been improved, and the main reason for the failure of VRLA batteries for electric vehicles is the sulfation of the negative electrode. To this end, there are more studies on...

more

Why choose gel batteries?

Aug , 22 2023

The colloidal lead-acid battery is an improvement of the ordinary lead-acid battery with liquid electrolyte. The sulfuric acid electrolyte is replaced by a colloidal electrolyte, and the safety, power storage, discharge performance, and service life are improved compared with the ordinary battery. The colloidal lead-acid battery adopts a gel-like electrolyte; no free liquid is inside. Under the sa...

more

Important performance of the battery

Sep , 04 2023

1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...

more

Why only online UPS topology provides mission critical load protection

Sep , 09 2023

Why does only online UPS topology provides mission critical load protection? Modern, static UPS systems are broadly classified into three design architectures: on-line, off-line and line interactive. This post describes and compares the three types and explains why – for truly critical loads – online ups topology is the only acceptable approach. Facility executives today face increased demands for...

more

How do lithium batteries screen distribution groups?

Sep , 19 2023

The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...

more

Ground Design

Nov , 10 2023

1、Introduction In the process of circuit design, grounding is a commonplace issue. The grounding method needs to be based on specific usage scenarios, and there is no universal grounding method. In this article, we will explain the essence of grounding issues, which is worth savoring carefully. 2、Classification of grounding The same hardware circuit may also have differences in grounding methods i...

more

Comparison of advantages and disadvantages of various energy storage systems

Nov , 16 2023

Comparison of advantages and disadvantages of various energy storage systems 1, mechanical energy storage Mechanical energy storage mainly includes pumped storage, compressed air energy storage and flywheel energy storage. (1) Pumped storage: when the grid trough the use of excess electricity as liquid energy media water from the low-lying reservoir to the high-lying reservoir, the grid peak load ...

more

Causes and prevention of lead-acid battery bulge

Nov , 25 2023

1. The battery is bulging 1.1 Causes 1) Overcharge 2) Ambient high temperature 3) Thermal runaway 4) Individual monomers in the series circuit are not found in time, resulting in overcharging of other batteries 1.2 Prevention 1) The BSB system is installed to intelligently manage the charging of the battery itself and effectively prevent the overcharging of the battery. 2) Secondly, the BMS system...

more

UPS power supply how to choose lithium battery and lead-acid battery?

Dec , 08 2023

UPS power supply is an indispensable and important part of modern power guarantee system. In the UPS power supply, the commonly used battery types include lithium iron phosphate batteries and lead-acid batteries, then lithium batteries and lead-acid battery UPS power supply which is good, consumers how to choose? This article will explain to you. UPS power supply choose lithium battery and lead-ac...

more

The main application of lithium battery UPS

Dec , 08 2023

In the current UPS power supply field, lithium battery UPS has become a new way, is widely used in various fields, the use of lithium batteries as UPS energy storage device can improve the performance of UPS. Because the volume and weight of lead-acid batteries are very large and relatively bulky, UPS lithium batteries will be a trend in the future. 1. Industrial equipment When the industrial equi...

more

Market Trends and Advantages of Household Energy Storage Systems

Dec , 15 2023

In recent years, home energy storage has become a hot topic in the renewable energy industry. With the growing popularity of solar panels and other forms of clean energy, homeowners are looking for ways to store excess energy for later use. This has led to a number of trends in home energy storage that are shaping the future of sustainable living. 1. Advancements In Battery Technology One of the m...

more