Blog
  • Effect of low temperature on battery performance

    Effect of low temperature on battery performance

    Mar , 30 2024
    When the lithium-ion battery is in a low temperature state, its available capacity is reduced and the charge and discharge power is limited. If the power is not limited, it will cause the evolution of lithium ions inside the battery, which will lead to irreversible attenuation of the battery capacity, and will bury a safety hazard for the use of the battery. The lower the ambient temperature, the ...
    more
  • Impact of high temperature on battery safety performance

    Impact of high temperature on battery safety performance

    Mar , 30 2024
    Lithium battery temperature is too high, more than 45℃ Lithium-ion batteries are more and more widely used in people's production and life, which makes its temperature environment become the main point of concern, relatively speaking, lithium batteries are easier to produce safety problems in high temperature environment, therefore, it is necessary to test the high temperature performance of lithi...
    more
  • Influence of self-discharge of lithium battery on lithium battery

    Influence of self-discharge of lithium battery on lithium battery

    Apr , 13 2024
    I. Introduction The existence of self-discharge phenomenon of lithium battery has become an important factor restricting its performance and life. In this paper, the principle, influencing factors and countermeasures of lithium battery self-discharge are discussed. Second, the principle of lithium battery self-discharge Self-discharge refers to the phenomenon that the battery capacity automaticall...
    more
  • Reason analysis of low capacity of lithium battery cell

    Reason analysis of low capacity of lithium battery cell

    Apr , 13 2024
    In the process of lithium battery manufacturing, the capacity of lithium battery cells is sometimes lower than expected, which not only affects the performance of the battery, but also shortens its service life. This paper will deeply analyze the reasons for the low capacity of lithium battery cells, in order to provide reference for related research and production. 1. Excessive and insufficient n...
    more
  • Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

    Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

    Apr , 20 2024
    What impact will the lithium battery have after being put aside for a long time? When the lithium battery is idle, due to the nature of the battery itself, self-discharge, passivation of positive and negative electrode materials, electrolyte decomposition and other phenomena will occur. The instability of the negative SEI will lead to the rapid decline of the negative active substance, which is ea...
    more
  • What is the impact of low temperature on lithium batteries and solutions

    What is the impact of low temperature on lithium batteries and solutions

    Apr , 20 2024
    The use of lithium batteries in low battery temperature environments is limited. In addition to a severe drop in discharge capacity, lithium batteries cannot be charged when the battery temperature is low. When the battery is charged at low temperature, the lithium ion embedment on the battery graphite electrode and the lithium plating reaction exist simultaneously and compete with each other. Und...
    more
  • Uninterruptible Power Supply UPS System for Computers Protection

    Uninterruptible Power Supply UPS System for Computers Protection

    Apr , 26 2024
    What is A UPS System? An Uninterruptible Power Supply (UPS) system is an electrical device that provides emergency power to a computer or other electronic equipment in the event of a power outage or electrical disturbance. It acts as a backup power source, allowing the connected devices to continue functioning for a certain period or providing sufficient time for a safe shutdown. How UPS System fo...
    more
  • Causes, effects and measures of common problems of photovoltaic modules

    Causes, effects and measures of common problems of photovoltaic modules

    Apr , 26 2024
    First. Excessively high/low temperature Excessively high or low PV module temperatures can negatively affect the performance of the PV power system. The following are the causes and effects as well as the corresponding measures: 1. Causes of excessive temperature: solar radiation, heat conduction, shadow coverage, etc. Impact: Reduces the conversion efficiency of the module. Excessive temperature ...
    more
  • Measures to suppress harmonics

    Measures to suppress harmonics

    May , 11 2024
    The fundamental cause of harmonic generation is due to nonlinear loads. When the current flows through the load and does not have a linear relationship with the applied voltage, it forms a non sinusoidal current, resulting in harmonics. The suppression of harmonics in the power system is to reduce or eliminate the harmonic current injected into the system, in order to control the harmonic voltage ...
    more
  • How Low Frequency UPS Safeguards Critical Information

    How Low Frequency UPS Safeguards Critical Information

    May , 11 2024
    What is a Low Frequency UPS? A Low Frequency Online UPS is a sophisticated power protection device that utilizes double conversion technology to provide continuous and clean power to connected equipment. Unlike traditional Offline UPS, where the load is directly powered by the mains until a power failure occurs, it continuously powers the load through an inverter, ensuring a seamless transition be...
    more
  • The difference and comparison of advantages between P-type and N-type components

    The difference and comparison of advantages between P-type and N-type components

    May , 11 2024
    Materials and Structure of a Solar Cell The construction of a particular solar cell is going to vary slightly depending on the specific technology that is utilized to manufacture it. In most solar cells, there is an aluminum back surface field and a P-N Junction. At the P-N junction, there are p-type crystalline silicon wafers that are positively charged and n-type crystalline silicon wafers that ...
    more
  • What is a nickel-cadmium battery

    What is a nickel-cadmium battery

    May , 31 2024
    1. Working principle of nickel-cadmium battery Nickel-cadmium batteries are rechargeable batteries that convert chemical energy into electricity through REDOX reactions. It consists of a negative electrode (the negative material is Cd), a positive electrode (the positive material is NiOOH), and an electrolyte (the main component is KOH). 2. Features of nickel-cadmium batteries Long cycle life; Wid...
    more
first page << 1 ... 28 29 30 31 32 >> last page

a total of32 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact