China Flooded VRLA batteries,Competitive Price Flooded VRLA batteries

Lithium battery capacity loss cause analysis

Jun , 21 2023

Lithium-ion batteries are the fastest-developing secondary batteries after cadmium-nickel and nickel-hydrogen batteries. Its high-energy properties make its future look bright. However, lithium-ion batteries are not perfect, and their biggest problem is the stability of their charge-discharge cycle. This paper summarizes and analyzes the possible causes of capacity attenuation of Li-ion batteries,...

more

Selection of lead carbon-carbon addition

Jun , 30 2023

The influence of chemical properties such as carbon material type and addition amount on battery performance was studied. Several different types of carbon materials (graphite, carbon black, activated carbon, etc.) were selected and tested for their effects on the negative electrode plate with additional amounts ranging from 0.2% to 4%, as well as hydrogen evolution inhibitors and adhesives. And c...

more

Effect of carbon black content on negative electrode performance of lead-acid battery

Aug , 04 2023

VRLA battery is not ideal in electric vehicles because of its short life under deep charge and discharge cycle conditions. In recent years, with the improvement of positive plate grid materials, the cycle life of batteries has been improved, and the main reason for the failure of VRLA batteries for electric vehicles is the sulfation of the negative electrode. To this end, there are more studies on...

more

Why choose gel batteries?

Aug , 22 2023

The colloidal lead-acid battery is an improvement of the ordinary lead-acid battery with liquid electrolyte. The sulfuric acid electrolyte is replaced by a colloidal electrolyte, and the safety, power storage, discharge performance, and service life are improved compared with the ordinary battery. The colloidal lead-acid battery adopts a gel-like electrolyte; no free liquid is inside. Under the sa...

more

Lead-acid battery thermal runaway failure analysis when the battery is in the state of charge

Sep , 04 2023

Lead acid battery thermal runaway fault analysis When the battery is charged: There is a cumulative increase in battery temperature. When the heat accumulates to a certain extent during the warming process, the battery terminal voltage will suddenly decrease, forcing the current to increase suddenly, and the phenomenon of high battery temperature and damage to the battery is called thermal runaway...

more

How do lithium batteries screen distribution groups?

Sep , 19 2023

The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...

more

Micropore system anatomy of AGM clapboard

Oct , 11 2023

The performance characteristics of VRLA batteries are largely determined by the capillary characteristics of the AGM separator, that is, the ability to keep the micropores in the thickness direction of the separator filled with electrolyte and prevent the electrolyte from drying out and causing delamination. These properties are influenced by the micropore structure, especially the micropore distr...

more

The role and importance of AGM partitions

Oct , 19 2023

AGM separator and transfer reaction between positive and negative plates Structure and function of partitions The AGM partitions used by VRLA have the following additional functions: Absorb the electrolyte (the third active substance of the battery) so that it does not flow. Provides a relatively large gas transfer hole for oxygen diffusion and thus facilitates the operation of the COC. High ionic...

more

Comparison of advantages and disadvantages of various energy storage systems

Nov , 16 2023

Comparison of advantages and disadvantages of various energy storage systems 1, mechanical energy storage Mechanical energy storage mainly includes pumped storage, compressed air energy storage and flywheel energy storage. (1) Pumped storage: when the grid trough the use of excess electricity as liquid energy media water from the low-lying reservoir to the high-lying reservoir, the grid peak load ...

more

Causes and prevention of lead-acid battery bulge

Nov , 25 2023

1. The battery is bulging 1.1 Causes 1) Overcharge 2) Ambient high temperature 3) Thermal runaway 4) Individual monomers in the series circuit are not found in time, resulting in overcharging of other batteries 1.2 Prevention 1) The BSB system is installed to intelligently manage the charging of the battery itself and effectively prevent the overcharging of the battery. 2) Secondly, the BMS system...

more

UPS power supply how to choose lithium battery and lead-acid battery?

Dec , 08 2023

UPS power supply is an indispensable and important part of modern power guarantee system. In the UPS power supply, the commonly used battery types include lithium iron phosphate batteries and lead-acid batteries, then lithium batteries and lead-acid battery UPS power supply which is good, consumers how to choose? This article will explain to you. UPS power supply choose lithium battery and lead-ac...

more

The main application of lithium battery UPS

Dec , 08 2023

In the current UPS power supply field, lithium battery UPS has become a new way, is widely used in various fields, the use of lithium batteries as UPS energy storage device can improve the performance of UPS. Because the volume and weight of lead-acid batteries are very large and relatively bulky, UPS lithium batteries will be a trend in the future. 1. Industrial equipment When the industrial equi...

more