log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Micropore system anatomy of AGM clapboard

    Micropore system anatomy of AGM clapboard

    Oct , 11 2023
    The performance characteristics of VRLA batteries are largely determined by the capillary characteristics of the AGM separator, that is, the ability to keep the micropores in the thickness direction of the separator filled with electrolyte and prevent the electrolyte from drying out and causing delamination. These properties are influenced by the micropore structure, especially the micropore distr...
    more

  • Lithium battery performance key indicators - internal resistance knowledge

    Lithium battery performance key indicators - internal resistance knowledge

    Oct , 13 2023
    First, the definition and role of internal resistance (1) Definition of internal resistance Internal resistance refers to the resistance encountered by the current passing through the inside of the lithium battery during discharge or charging. It is determined by the conductivity of the material inside the battery, the ion transport rate of the electrolyte, the contact resistance between the elect...
    more

  • The role and importance of AGM partitions

    The role and importance of AGM partitions

    Oct , 19 2023
    AGM separator and transfer reaction between positive and negative plates Structure and function of partitions The AGM partitions used by VRLA have the following additional functions: Absorb the electrolyte (the third active substance of the battery) so that it does not flow. Provides a relatively large gas transfer hole for oxygen diffusion and thus facilitates the operation of the COC. High ionic...
    more

  • Storage PCS topology architecture

    Storage PCS topology architecture

    Oct , 20 2023
    The topology of the Power Conversion System (PCS) of electrochemical energy storage system is closely related to the technical route of the electrochemical energy storage system PCS can operate in the following two states and thus shoulder two important functions: 1. The working state of the rectifier: converts the alternating current of the power grid into direct current when charging the battery...
    more

  • Lithium battery internal resistance - AC resistance and DC resistance

    Lithium battery internal resistance - AC resistance and DC resistance

    Oct , 27 2023
    Resistance is a physical quantity that characterizes the degree of obstruction of circuit elements to current transmission. The internal resistance (internal resistance) of lithium batteries is one of the important indicators to evaluate the performance of batteries. In practical applications, the internal resistance of lithium batteries has three important roles: 1. It can be used to evaluate the...
    more

  • What are the characteristics of industrial UPS power supply

    What are the characteristics of industrial UPS power supply

    Oct , 28 2023
    Industrial UPS power supplies need to focus on the ability to operate in high-temperature environments. The design of components must adapt to the operational requirements of the industrial environment, adapt to high temperature and humidity, and also be able to cope with the corrosion of corrosive gases on the system. Under various operating conditions and continuous full load operation, industri...
    more

  • Method for providing the service life of valve-controlled closed lead acid Battery (VRLA)?

    Method for providing the service life of valve-controlled closed lead acid Battery (VRLA)?

    Nov , 03 2023
    1 Temperature affects battery life: thermal runaway causes temperature rise: Valve-controlled closed lead-acid battery (VRLA) charging when the internal gas recombination itself is an exothermal reaction, so that the battery temperature rises, floating charge flow increases, the gas evolution increases, and the battery temperature rises higher, the battery itself is a "poor liquid", tightly assemb...
    more

  • Introduction to Data Center Cabinet Head Cabinet

    Introduction to Data Center Cabinet Head Cabinet

    Nov , 03 2023
    The column head cabinet is a cabinet used to allocate and manage one or more columns of cabinets in the same computer room, and has protection functions. In power room, communication equipment room, and large network room, column head cabinet is necessary and also necessary. 1. Basic concept of column head cabinet A column head cabinet is a cabinet located at the top (first position, equivalent to...
    more

  • Common methods in inverter operation command sources, programmable control inputs

    Common methods in inverter operation command sources, programmable control inputs

    Nov , 10 2023
    In addition to the frequency signal, there are two basic conditions for the operation of an inverter power supply, which are the operating signal of the inverter power supply. Common methods in the source of inverter operation commands The operation commands of the inverter power supply include start, stop, forward and reverse, forward and reverse, reset, etc. Like the pre rate setting mode of pow...
    more

  • Comparison of advantages and disadvantages of various energy storage systems

    Comparison of advantages and disadvantages of various energy storage systems

    Nov , 11 2023
    1. Lithium-ion batteries "Lithium battery" is a class of lithium metal or lithium alloy as a negative electrode material, the use of non-aqueous electrolyte solution of the battery, due to the chemical characteristics of lithium metal is very active, so that the processing of lithium metal, preservation, use, the environmental requirements are very high. With the development of science and technol...
    more

  • What are the aspects of battery energy storage system?

    What are the aspects of battery energy storage system?

    Nov , 11 2023
    When analyzing the energy storage process, the part of the object or space range drawn out in order to determine the research object is called the energy storage system. It includes energy and matter input and output, energy conversion and storage equipment. Energy storage systems often involve a variety of energy, a variety of equipment, a variety of substances, multiple processes, is a complex e...
    more

  • Comparison of advantages and disadvantages of various energy storage systems

    Comparison of advantages and disadvantages of various energy storage systems

    Nov , 16 2023
    Comparison of advantages and disadvantages of various energy storage systems 1, mechanical energy storage Mechanical energy storage mainly includes pumped storage, compressed air energy storage and flywheel energy storage. (1) Pumped storage: when the grid trough the use of excess electricity as liquid energy media water from the low-lying reservoir to the high-lying reservoir, the grid peak load ...
    more
first page << 1 ... 23 24 25 26 27 28 29 30 >> last page

a total of30 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact