Blog
  • How do lithium batteries screen distribution groups?

    How do lithium batteries screen distribution groups?

    Sep , 19 2023
    The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...
    more
  • Lithium battery performance key indicators - internal resistance knowledge

    Lithium battery performance key indicators - internal resistance knowledge

    Oct , 13 2023
    First, the definition and role of internal resistance (1) Definition of internal resistance Internal resistance refers to the resistance encountered by the current passing through the inside of the lithium battery during discharge or charging. It is determined by the conductivity of the material inside the battery, the ion transport rate of the electrolyte, the contact resistance between the elect...
    more
  • The role of large AC voltage regulators

    The role of large AC voltage regulators

    Oct , 19 2023
    Current stabilized power supply (large AC voltage stabilizer) There are many types of regulated power sources, whose function is to filter the mains electricity; The voltage required to stabilize various electrical appliances and circuits is called a regulated power supply. The definition of a regulated power supply is an electronic device that can provide stable AC or DC power to a load, includin...
    more
  • Storage PCS topology architecture

    Storage PCS topology architecture

    Oct , 20 2023
    The topology of the Power Conversion System (PCS) of electrochemical energy storage system is closely related to the technical route of the electrochemical energy storage system PCS can operate in the following two states and thus shoulder two important functions: 1. The working state of the rectifier: converts the alternating current of the power grid into direct current when charging the battery...
    more
  • Lithium battery internal resistance - AC resistance and DC resistance

    Lithium battery internal resistance - AC resistance and DC resistance

    Oct , 27 2023
    Resistance is a physical quantity that characterizes the degree of obstruction of circuit elements to current transmission. The internal resistance (internal resistance) of lithium batteries is one of the important indicators to evaluate the performance of batteries. In practical applications, the internal resistance of lithium batteries has three important roles: 1. It can be used to evaluate the...
    more
  • What are the characteristics of industrial UPS power supply

    What are the characteristics of industrial UPS power supply

    Oct , 28 2023
    Industrial UPS power supplies need to focus on the ability to operate in high-temperature environments. The design of components must adapt to the operational requirements of the industrial environment, adapt to high temperature and humidity, and also be able to cope with the corrosion of corrosive gases on the system. Under various operating conditions and continuous full load operation, industri...
    more
  • Introduction to Data Center Cabinet Head Cabinet

    Introduction to Data Center Cabinet Head Cabinet

    Nov , 03 2023
    The column head cabinet is a cabinet used to allocate and manage one or more columns of cabinets in the same computer room, and has protection functions. In power room, communication equipment room, and large network room, column head cabinet is necessary and also necessary. 1. Basic concept of column head cabinet A column head cabinet is a cabinet located at the top (first position, equivalent to...
    more
  • Common methods in inverter operation command sources, programmable control inputs

    Common methods in inverter operation command sources, programmable control inputs

    Nov , 10 2023
    In addition to the frequency signal, there are two basic conditions for the operation of an inverter power supply, which are the operating signal of the inverter power supply. Common methods in the source of inverter operation commands The operation commands of the inverter power supply include start, stop, forward and reverse, forward and reverse, reset, etc. Like the pre rate setting mode of pow...
    more
  • Ground Design

    Ground Design

    Nov , 10 2023
    1、Introduction In the process of circuit design, grounding is a commonplace issue. The grounding method needs to be based on specific usage scenarios, and there is no universal grounding method. In this article, we will explain the essence of grounding issues, which is worth savoring carefully. 2、Classification of grounding The same hardware circuit may also have differences in grounding methods i...
    more
  • Comparison of advantages and disadvantages of various energy storage systems

    Comparison of advantages and disadvantages of various energy storage systems

    Nov , 11 2023
    1. Lithium-ion batteries "Lithium battery" is a class of lithium metal or lithium alloy as a negative electrode material, the use of non-aqueous electrolyte solution of the battery, due to the chemical characteristics of lithium metal is very active, so that the processing of lithium metal, preservation, use, the environmental requirements are very high. With the development of science and technol...
    more
  • Comparison of advantages and disadvantages of various energy storage systems

    Comparison of advantages and disadvantages of various energy storage systems

    Nov , 16 2023
    Comparison of advantages and disadvantages of various energy storage systems 1, mechanical energy storage Mechanical energy storage mainly includes pumped storage, compressed air energy storage and flywheel energy storage. (1) Pumped storage: when the grid trough the use of excess electricity as liquid energy media water from the low-lying reservoir to the high-lying reservoir, the grid peak load ...
    more
  • What is single phase ups?

    What is single phase ups?

    Nov , 17 2023
    Single phase UPS has a single input and output source to the electrical equipment. With just one sinewave voltage, it only requires two wires to complete the circuit, one conductor and one neutral. Single phase UPS uninterruptible power supplies typically cover requirements up to 30 kVA. They are for servers, telecoms or computer systems, and network switches. Also they are along with any device t...
    more
first page << 1 ... 16 17 18 19 20 21 22 23 >> last page

a total of23 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact