log in registered
English

English

what are you looking for?

Blog
Critical power

b

home |

Critical power

  • Voltage drop calculation formula

    Voltage drop calculation formula

    Jul , 19 2024
    Voltage drop is a common issue in circuits. To calculate the decrease in voltage, we can use the following formula: Vout=Virn * (R2/(R1+R2)). This formula is based on the principle of resistance voltage division, where Vin represents the input voltage, Vout represents the output voltage, R1 represents the resistance value of the upper resistor, and R2 represents the resistance value of the lower r...
    more

  • The role of voltage transmitters

    The role of voltage transmitters

    Jul , 19 2024
    A voltage transmitter is a device used to convert an analog electrical signal generated by a sensor into a standard voltage or current signal output. It is widely used in the field of industrial automation and process control, and is also used to measure and monitor environmental parameters such as temperature, pressure, liquid level, etc. 1. What is a voltage transmitter Voltage Transmitter, abbr...
    more

  • Overvoltage protection and undervoltage protection principle of lithium battery

    Overvoltage protection and undervoltage protection principle of lithium battery

    Jul , 12 2024
    1, lithium battery protection board composition The general lithium battery protection board is composed of a control IC, a MOS tube, a resistance capacitor, and a FUSE, as shown in the following figure 1, overcharge protection principle When the battery is charged, the current (direction shown by the arrow) flows into the positive electrode of the battery pack and flows out of the negative electr...
    more

  • The characteristics and principle analysis of internal resistance of lithium battery

    The characteristics and principle analysis of internal resistance of lithium battery

    Jul , 12 2024
    The internal resistance of the battery is one of the most important characteristic parameters of the battery, which is an important parameter to characterize the battery life and the operating state of the battery, and an important symbol to measure the difficulty of the transmission of electrons and ions in the electrode. The internal resistance also reflects the health of the battery. The intern...
    more

  • What is the meaning of float charging for intelligent three‐stage charger in battery charger?

    What is the meaning of float charging for intelligent three‐stage charger in battery charger?

    Jul , 12 2024
    Float charging: Keep constant voltage charging, the charging current continues to decrease, and the battery is charged with maintenance type. When the charging current decreases to the set value or the charging time reaches the set value, the red light of sufficiency will be on, and the time will be about 2H, charging 10% of the power. Ordinary chargers are old‐fashioned chargers, charging, whethe...
    more

  • What are the meanings of deep discharge and excessive discharge of UPS batteries

    What are the meanings of deep discharge and excessive discharge of UPS batteries

    Jul , 11 2024
    Deep discharge generally refers to the discharge of approximately 80% of  the rated capacity of a battery. After a period of use, there will inevitably be some active substances sinking in the power UPS power battery. If the active  substances are not activated in a timely manner, it will inevitably have some  impact on the capacity of the battery. Therefore, it is best to cond...
    more

  • Explanation of terms related to UPS power supply

    Explanation of terms related to UPS power supply

    Jul , 06 2024
    Transient Recovery Time: The time it takes for the output voltage to return to the specified range when there is a sudden change in load (0‐100%, 100%‐0), usually on the order of seconds (ms). Filter: a device used to eliminate noise, the input or output filtered to obtain a pure contention of the alternating current. Shielding: The use of physical principles, used to isolate the electromagnetic r...
    more

  • Advantages and disadvantages of constant voltage and current power supply

    Advantages and disadvantages of constant voltage and current power supply

    Jul , 06 2024
    The advantages of constant voltage and current power supply include flexibility, stability, protection function, adjustability, and high efficiency, while the disadvantages mainly include high cost, large volume, thermal management requirements, and response time. 1. Advantages: a. Flexibility: A constant voltage and current power supply can provide stable current or voltage output as needed, suit...
    more

  • Analysis and application of charge and discharge curve of lithium battery

    Analysis and application of charge and discharge curve of lithium battery

    Jun , 27 2024
    Abstract: In this paper, the analysis method of charge and discharge curve of lithium battery is introduced in detail, including charge efficiency, discharge characteristics, capacity evaluation, internal resistance evaluation and cycle life evaluation. Through the interpretation of the charge and discharge curve, the performance and characteristics of lithium batteries can be deeply understood, w...
    more
first page << 1 ... 3 4 5 6 7 ... 67 >> last page

a total of67 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

Shenzhen EverExceed Industrial Co., Ltd

copyright © 2025 Shenzhen EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact