log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Cause of lead-acid battery failure

    Cause of lead-acid battery failure

    Mar , 08 2024
    1, sulphate: Friends who have seen the battery inside should understand that on the surface of the negative plate inside the lead-acid battery, there is a layer of white hard crystals attached, which can not be peeled off the surface of the negative plate into active substances after charging lead sulphate, which is sulphate, referred to as vulcanization. The appearance of vulcanization has a cert...
    more

  • Causes of vulcanization in lead-acid batteries

    Causes of vulcanization in lead-acid batteries

    Mar , 08 2024
    A lead-acid battery is a common type of battery in which the positive and negative electrodes are composed of lead oxide (PbO2) and sponge lead (Pb), respectively, and the electrolyte is a sulfuric acid solution. Vulcanization is an unavoidable chemical reaction during the use of lead-acid batteries, which may lead to reduced battery capacity and shortened life. The following are the conditions an...
    more

  • Choose the Smart UPS between Online UPS vs Line Interactive UPS

    Choose the Smart UPS between Online UPS vs Line Interactive UPS

    Mar , 14 2024
    Online UPS vs Line Interactive UPS While both UPS provide full protection from major power problems, such as surges, spikes, sags, blackouts and brownouts, they differ in a few significant areas. Simply put, an on-line UPS offers a higher level of protection than a line interactive at a higher cost. More specific areas where the two types differ include sine wave output, voltage regulation, and do...
    more

  • Lead acid battery production technology

    Lead acid battery production technology

    Mar , 15 2024
    1, lead-acid battery process overview Lead-acid battery is mainly composed of battery tank, battery cover, positive and negative plate, dilute sulfuric acid electrolyte, partition and accessories. 2, the process manufacturing is described as follows Lead powder manufacturing: The 1# electrolytic lead with special equipment lead powder machine through oxidation screening to make meet the requiremen...
    more

  • Why Rack Mount UPS Power Supply is Vital for Industrial Automation and Efficiency

    Why Rack Mount UPS Power Supply is Vital for Industrial Automation and Efficiency

    Mar , 21 2024
    What is a Rack Mount UPS Power Supply? A Rack-Mount UPS Power Supply is a device that offers backup power to electronic equipment during outages, surges, or power fluctuations. This crucial piece of equipment is typically mounted within a standard 19-inch server rack. It is an integral part of data centers, network closets, server rooms, and other critical infrastructure setups. How Does a Rack-Mo...
    more

  • What do you need to pay attention to when replacing lead acid with lithium in UPS applications?

    What do you need to pay attention to when replacing lead acid with lithium in UPS applications?

    Mar , 22 2024
    Understand battery characteristics: Before you start switching, be sure to understand the characteristics and operating requirements of lithium batteries. Compared with lead-acid batteries, lithium batteries have a higher energy density and faster charging speed. However, they are also more sensitive and require special charge and discharge management. Select the right lithium battery: Select the ...
    more

  • Advantages of Solar Gel batteries

    Advantages of Solar Gel batteries

    Apr , 02 2024
    Are Gel Batteries Better For Solar? The modern gel battery was invented in 1957. Gel batteries are one of two sealed lead acid batteries, the other being an AGM battery. Sealed lead acid batteries are distinct from other lead acid batteries in that they are maintenance-free What’s in a gel battery? A gel battery is a dry battery since it doesn’t use a liquid electrolyte. In a gel battery, the elec...
    more

  • THE RELATIONSHIP BETWEEN APPARENT POWER, ACTIVE POWER, AND REACTIVE POWER

    THE RELATIONSHIP BETWEEN APPARENT POWER, ACTIVE POWER, AND REACTIVE POWER

    Apr , 20 2024
    The apparent power, active power, and reactive power meet the following triangular relationships: Figure (1): Schematic diagram of the power triangle S:Apparent power S 2 =P 2 + Q 2 Q:Reactive power P = S *cosφ
    more

  • What is the impact of low temperature on lithium batteries and solutions

    What is the impact of low temperature on lithium batteries and solutions

    Apr , 20 2024
    The use of lithium batteries in low battery temperature environments is limited. In addition to a severe drop in discharge capacity, lithium batteries cannot be charged when the battery temperature is low. When the battery is charged at low temperature, the lithium ion embedment on the battery graphite electrode and the lithium plating reaction exist simultaneously and compete with each other. Und...
    more

  • Lead-acid battery failure model

    Lead-acid battery failure model

    May , 11 2024
    The most common failure modes are:   - Softening or shedding of the active material.  During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide.    Corrosion...
    more

  • A Brief Introduction To Filter Circuits

    A Brief Introduction To Filter Circuits

    May , 25 2024
    In the rectifier filter circuit, there are two parts of the circuit altogether, respectively the rectifier circuit and the filter circuit, the functions of the two are different, the function of the rectifier circuit is to convert the sine wave AC voltage, and the function of the filter circuit is to convert the unidirectional ripple voltage, and the functions of the two parts of the circuit work ...
    more

  • A brief introduction to EMI

    A brief introduction to EMI

    Jun , 14 2024
    What is an active power filter Active Power Filter (APF) is a new type of power electronic device used to dynamically suppress harmonics and compensate reactive power, which can compensate for harmonics and reactive power changes in magnitude and frequency. The reason why the active filter is called active, as the name suggests, the device needs to provide a power supply (to compensate for the har...
    more
first page << 1 ... 8 9 10 11 >> last page

a total of11 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact