how to store lithium batteries for a long time

Advantages of Solar Gel batteries

Apr , 02 2024

Are Gel Batteries Better For Solar? The modern gel battery was invented in 1957. Gel batteries are one of two sealed lead acid batteries, the other being an AGM battery. Sealed lead acid batteries are distinct from other lead acid batteries in that they are maintenance-free What’s in a gel battery? A gel battery is a dry battery since it doesn’t use a liquid electrolyte. In a gel battery, the elec...

more

Influence of self-discharge of lithium battery on lithium battery

Apr , 13 2024

I. Introduction The existence of self-discharge phenomenon of lithium battery has become an important factor restricting its performance and life. In this paper, the principle, influencing factors and countermeasures of lithium battery self-discharge are discussed. Second, the principle of lithium battery self-discharge Self-discharge refers to the phenomenon that the battery capacity automaticall...

more

Reason analysis of low capacity of lithium battery cell

Apr , 13 2024

In the process of lithium battery manufacturing, the capacity of lithium battery cells is sometimes lower than expected, which not only affects the performance of the battery, but also shortens its service life. This paper will deeply analyze the reasons for the low capacity of lithium battery cells, in order to provide reference for related research and production. 1. Excessive and insufficient n...

more

Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

Apr , 20 2024

What impact will the lithium battery have after being put aside for a long time? When the lithium battery is idle, due to the nature of the battery itself, self-discharge, passivation of positive and negative electrode materials, electrolyte decomposition and other phenomena will occur. The instability of the negative SEI will lead to the rapid decline of the negative active substance, which is ea...

more

What is the impact of low temperature on lithium batteries and solutions

Apr , 20 2024

The use of lithium batteries in low battery temperature environments is limited. In addition to a severe drop in discharge capacity, lithium batteries cannot be charged when the battery temperature is low. When the battery is charged at low temperature, the lithium ion embedment on the battery graphite electrode and the lithium plating reaction exist simultaneously and compete with each other. Und...

more

The difference between energy storage converter and grid-connected inverter

Apr , 26 2024

Energy Storage Converter Energy storage converters (PCS), also known as "bi-directional energy storage inverters", are the core components of the two-way flow of electricity between the energy storage system and the grid, and are used to control the charging and discharging processes of the battery, and to perform the conversion of AC and DC currents. In the absence of grid, it can directly supply...

more

Causes, effects and measures of common problems of photovoltaic modules

Apr , 26 2024

First. Excessively high/low temperature Excessively high or low PV module temperatures can negatively affect the performance of the PV power system. The following are the causes and effects as well as the corresponding measures: 1. Causes of excessive temperature: solar radiation, heat conduction, shadow coverage, etc. Impact: Reduces the conversion efficiency of the module. Excessive temperature ...

more

How Low Frequency UPS Safeguards Critical Information

May , 11 2024

What is a Low Frequency UPS? A Low Frequency Online UPS is a sophisticated power protection device that utilizes double conversion technology to provide continuous and clean power to connected equipment. Unlike traditional Offline UPS, where the load is directly powered by the mains until a power failure occurs, it continuously powers the load through an inverter, ensuring a seamless transition be...

more

Lead-acid battery failure model

May , 11 2024

The most common failure modes are: - Softening or shedding of the active material. During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide. Corrosion...

more

Inverter common fault contents and solutions

May , 11 2024

As an important component of the entire power plant, inverters can detect almost all power plant parameters for both DC components and grid connected equipment. If there is an abnormality, the health status of the supporting equipment in the power station can be checked through the feedback information from the inverter. Below are some common fault information and handling methods for photovoltaic...

more

A Brief Introduction To Filter Circuits

May , 25 2024

In the rectifier filter circuit, there are two parts of the circuit altogether, respectively the rectifier circuit and the filter circuit, the functions of the two are different, the function of the rectifier circuit is to convert the sine wave AC voltage, and the function of the filter circuit is to convert the unidirectional ripple voltage, and the functions of the two parts of the circuit work ...

more

Commonly used industrial communication protocols

May , 31 2024

1、Modbus protocol (1) Modbus packet type Modbus protocol is an application-layer message transmission protocol that can be transmitted on various media, and the transmission mode is divided into three types: ASCII, RTU (Remote Terminal Control System), and TCP. There are multiple versions of the Modbus protocol for serial ports, but the following three are the most common: Modbus-RTU: In thi...

more

blog

blog