log in registered
English

English

what are you looking for?

Blog
blog

b

home |

blog

  • Lithium battery cycle data analysis with constant voltage charging current and capacity decay curve

    Lithium battery cycle data analysis with constant voltage charging current and capacity decay curve

    Oct , 29 2021
    Generally, cycle life testing will generate a lot of data, which can obtain a lot of information. What analysis and processing can we do with these cycle data? The following summarizes some of the data processing, continuation from last week’s article. 1. Constant voltage charging current and time Lithium-ion batteries are usually discharged at different currents during use, and often cannot under...
    more

  • Power Regulation Solution

    Power Regulation Solution

    Mar , 28 2022
    Due to the influence of various factors such as power supply facilities and regional conditions, the voltage fluctuation of the AC power supply grid in some countries is still relatively large. Specially in some remote and rural areas of countries with unstable urban networks. The main conditions of AC power grid voltage fluctuation are as follows: (1) The voltage fluctuates high and low, and cann...
    more

  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more

  • How a Voltage Regulator Works

    How a Voltage Regulator Works

    Aug , 22 2022
    All voltage regulators utilize the same technology to stabilize the output voltage. The output voltage is sampled (Sampled) through a resistor divider (Resistive Divider) connected to the inverting input terminal (Inverting Input) of the error amplifier (Error Amplifier), and the non-inverting input terminal (Non-inverting Input) of the error amplifier is connected to a reference voltage Vref. The...
    more

  • What are the installation steps for the voltage stabilizer?

    What are the installation steps for the voltage stabilizer?

    Aug , 22 2022
    The voltage stabilizer is composed of voltage stabilizer and constant voltage, control circuit, and servo motor. When the input voltage or load changes, the control circuit performs sampling, comparison and amplification, and then drives the servo motor to rotate, so that the position of the carbon brush of the voltage regulator changes, and the coil turns ratio is automatically adjusted to mainta...
    more

  • Why is industrial equipment equipped with voltage regulators

    Why is industrial equipment equipped with voltage regulators

    Sep , 26 2022
    The stable and reliable operation of industrial equipment requires a stable energy supply, that is, high-quality power supply. The current power quality is seriously affected and deteriorating, which has a great impact on the safe use of industrial equipment. [Power supply mainly has the following effects] a. Overvoltage: It will cause the overvoltage alarm of the CNC system, accelerate the aging ...
    more

  • What are the procedures for the correct use of a voltage regulator?

    What are the procedures for the correct use of a voltage regulator?

    Sep , 26 2022
    The voltage stabilizer can be widely used in: electronic computers, precision machine tools, computed tomography (CT), precision instruments, test devices, Elevator lighting, imported equipment and production lines and other places that require stable voltage of the power supply. So what are the procedures for using the voltage regulator correctly? Turn on the power switch of the voltage stabilize...
    more

  • What are the possible reasons for the zero voltage or low voltage of the single cell and battery pack?

    What are the possible reasons for the zero voltage or low voltage of the single cell and battery pack?

    Oct , 24 2022
    What are the possible reasons for the zero voltage or low voltage of the single cell? 01) External short circuit or overcharge or reverse charge of the battery (forced overdischarge); 02) The battery is continuously overcharged by high rate and high current, resulting in the expansion of the battery pole core, the direct contact of the positive and negative poles, and the short circuit; 03) Intern...
    more

  • How To Choose An Automatic Voltage Regulator?

    How To Choose An Automatic Voltage Regulator?

    Nov , 28 2022
    Below, we list the top five features of a high-quality automatic voltage regulator to help ensure you find the best match for your application. 1. VOLTAGE REGULATION: Optimal voltage regulation is achieved when the value of voltage is equivalent to all electrical equipment loads. Several factors can affect voltage regulation, including wire and cable size and type, transformer reactance and c...
    more

  • The role of large AC voltage regulators

    The role of large AC voltage regulators

    Oct , 19 2023
    Current stabilized power supply (large AC voltage stabilizer) There are many types of regulated power sources, whose function is to filter the mains electricity; The voltage required to stabilize various electrical appliances and circuits is called a regulated power supply. The definition of a regulated power supply is an electronic device that can provide stable AC or DC power to a load, includin...
    more

  • The working principle and control method of IGBT voltage modification method

    The working principle and control method of IGBT voltage modification method

    Nov , 03 2023
    Unlike the resistance method, the voltage method involves changing the driving voltage during the control phase to control voltage and current overshoot. There are approximately two methods to change the driving voltage. One is to achieve the change by dividing the driving voltage through a resistor, and the other is to change the output signal in the control chip (DSPFPGA), and then convert it in...
    more

  • Principle of overvoltage and undervoltage

    Principle of overvoltage and undervoltage

    Jan , 13 2024
    The overvoltage and undervoltage protector is installed in the distribution box. Its main function is to cut off the power supply in a timely manner when the low-voltage distribution line or electrical equipment malfunctions, causing an increase or decrease in the voltage of the distribution system, thereby avoiding losses to components or distribution systems. This article mainly introduces the w...
    more
first page 1 2 >> last page

a total of2 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact