log in registered
English

English

what are you looking for?

Blog
Lead acid batteries

b

home |

Lead acid batteries

  • Measurement method and procedure of internal resistance of lead-acid battery

    Measurement method and procedure of internal resistance of lead-acid battery

    Dec , 07 2024
    1.Procedure for Battery Resistance Tests Use the following test procedure or use the capacity test procedure described in IEEE std. 1188. Step 1. Make sure all battery connections are clean, tight and free of corrosion. Pay attention to the insulation of tools to avoid short-circuiting of batteries. Step 2. Equalizing charge the batteries for 12hrs; Constant voltage & limited maximum current c...
    more

  • Influence of electrolyte on battery performance

    Influence of electrolyte on battery performance

    Nov , 29 2024
    (1) The relationship between the electrolyte concentration and the electromotive force and open circuit voltage of the lead-acid battery. The electromotive force and open circuit voltage of the lead-acid battery are related to the concentration of the electrolyte of the lead-acid battery than H2O4, and the electromotive force and open circuit voltage of the lead-acid battery also decrease with the...
    more

  • Effect of electrolyte density and discharge on lead-acid batteries

    Effect of electrolyte density and discharge on lead-acid batteries

    Nov , 29 2024
    (1) Electrolyte density under different geographical and climatic strips. Whether the electrolyte density is high or low, it is necessary to make a specific analysis for the specific situation. Winter temperature is low, the viscosity of the electrolyte is large, it is not easy to penetrate the inside of the plate, the end voltage and capacity of the battery will decline, especially in the strong ...
    more

  • Lead-acid battery failure model

    Lead-acid battery failure model

    May , 11 2024
    The most common failure modes are:   - Softening or shedding of the active material.  During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide.    Corrosion...
    more

  • Advantages of Solar Gel batteries

    Advantages of Solar Gel batteries

    Apr , 02 2024
    Are Gel Batteries Better For Solar? The modern gel battery was invented in 1957. Gel batteries are one of two sealed lead acid batteries, the other being an AGM battery. Sealed lead acid batteries are distinct from other lead acid batteries in that they are maintenance-free What’s in a gel battery? A gel battery is a dry battery since it doesn’t use a liquid electrolyte. In a gel battery, the elec...
    more

  • The relationship between temperature and battery

    The relationship between temperature and battery

    Mar , 22 2024
    High ambient temperature greatly affects the battery service life. When the temperature rises, the corrosion of the battery plate will increase, and more water will be consumed, thus shortening the battery life. The battery can obtain a long life at 25 ° C, and the service life is reduced by about half if the long-term operating temperature is increased by 10 ° C. The storage battery should be pla...
    more

  • Lead-acid battery production process equipment

    Lead-acid battery production process equipment

    Mar , 15 2024
    1, plate manufacturing includes: lead powder manufacturing, grid casting, plate manufacturing, plate formation, etc. (1) Lead powder manufacturing equipment casting machine or segment cutting machine, lead powder machine and transportation storage system; (2) grid casting equipment lead melting furnace, plate casting machine and various molds; (3) plate manufacturing equipment and paste machine, s...
    more

  • Lead acid battery production technology

    Lead acid battery production technology

    Mar , 15 2024
    1, lead-acid battery process overview Lead-acid battery is mainly composed of battery tank, battery cover, positive and negative plate, dilute sulfuric acid electrolyte, partition and accessories. 2, the process manufacturing is described as follows Lead powder manufacturing: The 1# electrolytic lead with special equipment lead powder machine through oxidation screening to make meet the requiremen...
    more

  • Causes of vulcanization in lead-acid batteries

    Causes of vulcanization in lead-acid batteries

    Mar , 08 2024
    A lead-acid battery is a common type of battery in which the positive and negative electrodes are composed of lead oxide (PbO2) and sponge lead (Pb), respectively, and the electrolyte is a sulfuric acid solution. Vulcanization is an unavoidable chemical reaction during the use of lead-acid batteries, which may lead to reduced battery capacity and shortened life. The following are the conditions an...
    more
first page 1 2 3 ... 11 >> last page

a total of11 pages

Are you looking for more information about EverExceed's  professional products and solutions?  Our expert team is always here to help. Please fill in the form and our sales representative will contact you shortly. EverExceed | Empower, Energize, Exceed the Energy you Expect forever.
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Contact us

EverExceed Industrial Co., Ltd

copyright © 2024 EverExceed Industrial Co., Ltd.all rights reserved.
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact